Australia

Databasepublished June 2010These tables are a complement to the report Agricultural Policies in OECD Countries: At a Glance 2010. They comprise the summary of agricultural support estimates for OECD countries.More detailed data by country and documentation can be found in the full dataset (Excel Format) available at :

Databasepublished June 2010These tables are a complement to the report Agricultural Policies in OECD Countries: At a Glance 2010. They comprise the summary of agricultural support estimates for OECD countries.More detailed data by country and documentation can be found in the full dataset (Excel Format) available at :

Databasepublished June 2010These tables are a complement to the report Agricultural Policies in OECD Countries: At a Glance 2010. They comprise the summary of agricultural support estimates for OECD countries.More detailed data by country and documentation can be found in the full dataset (Excel Format) available at :

Databasepublished June 2010These tables are a complement to the report Agricultural Policies in OECD Countries: At a Glance 2010. They comprise the summary of agricultural support estimates for OECD countries.More detailed data by country and documentation can be found in the full dataset (Excel Format) available at :

This dataset contains the main results of the 2014 Eurostat-OECD PPP comparison for the 47 countries that participated in the 2014 round of the Eurostat-OECD Purchasing Power Parity (PPP) Programme. The dataset is organised in 23 tables which show results both in US dollars and OECD as reference (Table 1.1 to Table 1.12) and in euros and European Union as reference (Table 2.1 to Table 2.11) calculated with the EKS method. The tables contain the following information: Table 1.1 to 1.12 The dollar serves as numeraire and the OECD as reference country (except for Table 1.12 where the United States are the reference country). Table 1.1 and Table 1.2 present the data on which the following ten tables are based. • Table 1.1 gives nominal expenditure in national currency of the participating countries. • Table 1.2 presents PPPs (OECD=1.00) that have been calculated for the participating countries using the price and expenditure data collected during the 2014 round. The PPPs were obtained by the EKS method of calculation and aggregation. • Table 1.3 shows nominal expenditure of Table 1.1 converted to US dollars. Exchange rates do not reflect the relative purchasing power of different currencies and the converted expenditure is still expressed at national prices. As such, it remains nominal measures, the spatial equivalent of a time series of GDP for a single country at current prices. Hence, they are called “nominal expenditure”. The nominal expenditure in the table reflects both differences in the quantities of goods and services purchased in the countries and differences in the price levels of the countries. • Table 1.4 gives nominal expenditure of Table 1.3 expressed on a per capita basis using the midyear population data. • Table 1.5 and Table 1.6 present the nominal expenditure from Table 1.3 and the nominal expenditure per head from Table 1.4 as indices with OECD=100. • Table 1.7 shows real expenditure converted to US dollar using the PPPs from Table 1.2. PPPs equalise the purchasing power of different currencies during the process of conversion and the converted expenditures are expressed at international prices (that is at the same price level). As such, they are real measures, the spatial equivalent of a time series of GDP for a single country at constant prices. Hence, they are called “real expenditures”. The real final expenditures in the table reflect only differences in the volumes of goods and services purchased in the countries. • Table 1.8 gives the real expenditure of Table 1.7 expressed on a per capita basis using the midyear population data. Again, the real expenditures per head in this table are not additive nor are they subject to the Gerschenkron effect. • Table 1.9 and Table 1.10 present the real expenditure on GDP from Table 1.7 and the real final expenditure per head on GDP from Table 1.8 as indices with OECD=100. • Table 1.11 gives the price levels which are computed as ratios of the PPPs in Table 1.2 to the exchange rates and are expressed as indices with OECD=100. For a given aggregate, they indicate the number of units of the common currency needed to buy the same volume of the  aggregate in each country. Price levels that exceed 100 indicate that the level of prices in that country and for that analytical category is higher than the average price level for the OECD. • Table 1.12 present PPPs as in Table 1.2 (see description above) but with the United States as reference country (US=1.00). Table 2.1 to 2.11 The euro serves as numeraire and the European Union as reference country. Table 2.1 and Table 2.2 present the data on which the following nine tables are based. Table 2.1 to 2.11 contain the same information as Table 1.1 to 1.11 with a different basis. For explanation on the contents, please see description above.

With the release of the 2016 Global Manufacturing Competitiveness Index (GMCI), Deloitte Touche Tohmatsu Limited (Deloitte Global) and the Council on Competitiveness (the Council) in the US build upon the GMCI research, with prior studies published in 2010 and 2013. The results of the 2016 study clearly show the ongoing influence manufacturing has on driving global economies. From its influence on infrastructure development, job creation, and contribution to gross domestic product (GDP) on both an overall and per capita basis, a strong manufacturing sector creates a clear path toward economic prosperity.

Databasepublished : June 2018This dataset and predefined summary tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2018, which monitors agricultural policy developments in 35 OECD member countries, 6 non-OECD EU member states and 10 emerging economies: Brazil, China, Colombia, Costa Rica, Kazakhstan, Russia, the Philippines, South Africa, Ukraine and Viet Nam.The OECD uses a comprehensive system for measuring and classifying support to agriculture - the Producer and Consumer Support Estimates (PSEs and CSEs) and related indicators. They provide insight into the increasingly complex nature of agricultural policy and serve as a basis for OECD’s work on agricultural policies. More detailed data by country and documentation can be found in the full dataset (Excel Format) available at :

Databasepublished : June 2018This dataset and predefined summary tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2018, which monitors agricultural policy developments in 35 OECD member countries, 6 non-OECD EU member states and 10 emerging economies: Brazil, China, Colombia, Costa Rica, Kazakhstan, Russia, the Philippines, South Africa, Ukraine and Viet Nam.The OECD uses a comprehensive system for measuring and classifying support to agriculture - the Producer and Consumer Support Estimates (PSEs and CSEs) and related indicators. They provide insight into the increasingly complex nature of agricultural policy and serve as a basis for OECD’s work on agricultural policies. More detailed data by country and documentation can be found in the full dataset (Excel Format) available at :

The 3P Anti-trafficking Policy Index evaluates governmental anti-trafficking efforts in the three main policy dimensions (3Ps), based on the requirements prescribed by the United Nations Protocol to Prevent, Suppress and Punish Trafficking in Persons, especially Women and Children (2000).   The three main policy dimensions (3Ps) are:Prosecution of perpetrators of human traffickingPrevention of human traffickingProtection of the victims of human trafficking Each of the 3P areas is evaluated on a 5-point scale and each index is aggregated to the overall 3P Anti-trafficking Index as the  sum (score 3-15).Prosecution Index Score: 1 (no compliance) - 5 (full compliance)Prevention Index Score: 1 (no compliance) - 5 (full compliance)Protection Index Score: 1 (no compliance) - 5 (full compliance)3P Anti-trafficking Policy Index Score: 3 (no compliance for any of the three areas) - 15 (full compliance for all of the three areas) The 3P Anti-trafficking Policy Index is available for each country and each year and currently includes up to 189 countries for the preiod from 2000 to 2015.

Contains statistics on live births and fertility for Australia, states and territories, based on calendar year of registration data. Information on characteristics of the mother and child include place of usual residence, sex, Indigenous status, age, marital status and country of birth of parents.

Contains statistics on live births and fertility for Australia, states and territories, based on calendar year of registration data. Information on characteristics of the mother and child include place of usual residence, sex, Indigenous status, age, marital status and country of birth of parents.

Population projections illustrate how the Australian Aboriginal and Torres Strait Islander population would change in the future as a result of certain assumptions. This dataset presents 10 scenarios, comprising combinations of different rates of fertility (x3), paternity (x3), mortality (x3), interstate migration (x1) and overseas migration (x1).

Chapter C includes indicators that are a mixture of outcome indicators, policy levers and context indicators. Internationalisation of education and progression rates are, for instance, outcome measures to the extent that they indicate the results of policies and practices at the classroom, school and system levels. But they can also provide contexts for establishing policy by identifying areas where policy intervention is necessary, for example, to address issues of inequity.

Accuracy of annual economic forecasts of international organisations - European Commission, IMF, OECD, World Bank, UN LINK

Activities of U.S. MNEs: Majority-Owned Foreign Affiliates, Selected Indicators, 2016.

This indicator measures the income of jobless families relying on minimum-income safety-net benefits as a percentage of the median disposable income in the population. This can be compared with a poverty line defined as a fixed percentage of median income. For instance, if the poverty threshold is 50% of median income, a value of 30% means that benefit entitlements alleviate poverty risks of 60%

Data given in this domain are collected on a yearly basis by the National Statistical Institutes or Ministries and are based on the annual Eurostat Model Questionnaires on ICT (Information and Communication Technologies) usage and e-commerce in enterprises. Large part of the data collected are used in the context of the 2011 - 2015 benchmarking framework (endorsed by i2010 High Level Group in November 2009) for the Digital Agenda Scoreboard, Europe's strategy for a flourishing digital economy by 2020. This conceptual framework follows the i2010 Benchmarking Framework which itself followed-up the eEurope 2005 Action Plan. The aim of the European ICT usage surveys is to collect and disseminate harmonised and comparable information on the use of Information and Communication Technologies in enterprises and e-commerce at European level. Coverage: The characteristics to be provided are drawn from the following list of subjects: - ICT systems and their usage in enterprises, - use of the Internet and other electronic networks by enterprises, - e-commerce, - e-business processes and organisational aspects, - use of ICT by enterprises to exchange information and services with governments and public administrations (e-government), - ICT competence in the enterprise and the need for ICT skills, - barriers to the use of ICT, the Internet and other electronic networks, e-commerce and e-business processes, - ICT expenditure and investment, - ICT security and trust, - use of ICT and its impact on the environment (Green ICT), - access to and use of the Internet and other network technologies for connecting objects and devices (Internet of Things), - access to and use of technologies providing the ability to connect to the Internet or other networks from anywhere at any time (ubiquitous connectivity). Breakdowns: - by size class, - by NACE categories, - by region (until 2010)

LGA2011 based data for Age By Sex, Time Series Profiles Table T03, for 2011 Census ABS Census Homepage

SA1 based data for Age by Sex, Basic Community Profile Table B04, for 2011 Census ABS Census Homepage

Australia/State/SA4/SA3/SA2 based data for Age By Sex, Time Series Profiles Table T03, for 2011 Census ABS Census Homepage

This dataset provides data for foreign tourist arrivals distributed by age  group.

Agricultural Commodities, Australia

The series is part of the ILO estimates and is harmonized to account for differences in national data and scope of coverage, collection and tabulation methodologies as well as for other country-specific factors. For more information, refer to the ILO estimates and projections methodological note.

Data Source - CBS Notes: Financial Year 2016/17, 2017/18, 2018/19 have been considered as 2017, 2018, 2019 respectively

Notes: Financial Years 2016/17, 2017/18, 2018/19 have been considered as 2017, 2018, 2019 respectively. Data Source - IGS

Data Source - PSD Notes: Financial Year 2016/17, 2017/18, 2018/19 have been considered as 2017, 2018, 2019 respectively.

The data describe the average use of chemical and mineral fertilizers per area of cropland (arable land and permanent crops) at national, regional, and global level in a time series from 2002 to 2014The data describe the average use of chemical and mineral fertilizers per area of cropland (arable land and permanent crops) at national, regional, and global level in a time series from 2002 to 2015

The Agri-environmental Indicators—Land domain provides information on the annual evolution of the distribution of agricultural and forest areas, and their sub-components, including irrigated areas, at national, regional and global levels.

The Livestock Patterns domain of the FAOSTAT Agri-Environmental Indicators contains data on livestock numbers, shares of major livestock species and livestock densities in the agricultural area. Values are calculated using Livestock Units (LSU), which facilitate aggregating information for different livestock types. Data are available by country, with global coverage, for the period 1961–2014. This methodology applies the LSU coefficients reported in the "Guidelines for the preparation of livestock sector reviews" (FAO, 2011). From this publication, LSU coefficients are computed by livestock type and by country. The reference unit used for the calculation of livestock units (=1 LSU) is the grazing equivalent of one adult dairy cow producing 3000 kg of milk annually, fed without additional concentrated foodstuffs. FAOSTAT agri-environmental indicators on livestock patterns closely follow the structure of the indicators in EUROSTAT.

The data describe the average use of pesticides per area of cropland (arable land and permanent crops) at national level in a time series from 1990 to 2014. 

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilisers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

Destination of Official Development Assistance Disbursements. Geographical breakdown by donor, recipient and for some types of aid (e.g. grant, loan, technical co-operation) on a disbursement basis (i.e. actual expenditures). The data cover flows from bilateral and multilateral donors which focus on flows from DAC member countries and the EU Institutions.

This dataset is used to report the tying status of bilateral ODA commitments. Members have agreed that administrative costs and technical co-operation expenditure should be disregarded in assessing the percentages of tied, partially untied and untied aid. These items have not been included in the data reported in this data set.

Air Emission Accounts are available for European countries and a few non-European countries. The System of Environmental-Economic Accounting (SEEA) Central Framework is an accounting system developed around two objectives: "understanding the interactions between the economy and the environment" and describing "stocks and changes in stocks of environmental assets". The SEEA combines national accounts and environmental statistics in a statistical framework with consistent definitions, classifications and concepts allowing policy makers to evaluate environmental pressures from economic activities at macro- and meso-levels. Data refer to total emissions of CO2 (CO2 emissions from energy use and industrial processes, e.g. cement production), CH4 (methane emissions from solid waste, livestock, mining of hard coal and lignite, rice paddies, agriculture and leaks from natural gas pipelines), N2O (nitrous oxide), HFCs (hydrofluorocarbons), PFCs (perfluorocarbons), (SF6 +NF3) (sulphur hexafluoride and nitrogen trifluoride), SOx (sulphur oxides, NOx (nitrogen oxides), CO (carbon monoxide), NMVOC (non-methane volatile organic compounds), PM2.5 (particulates less that 2.5 µm), PM10 (particulates less that 10 µm) and NH3 (ammonia). The OECD Air Emission Accounts present data based on ISIC rev. 4.

Data cited at: The World Bank https://datacatalog.worldbank.org/ Topic: All The Ginis Dataset Publication: https://datacatalog.worldbank.org/dataset/all-ginis-dataset License: http://creativecommons.org/licenses/by/4.0/   This dataset includes combined and standardized Gini data from eight original sources: Luxembourg Income Study (LIS), Socio-Economic Database for Latin America (SEDLAC), Survey of Living Conditions (SILC) by Eurostat, World Income Distribution (WYD; the full data set is available here), World Bank Europe and Central Asia dataset, World Institute for Development Research (WIDER), World Bank Povcal, and Ginis from individual long-term inequality studies (just introduced in this version).

Data source(s) used: Crimes reported to the Judicial authorities by the State Police, Carabinieri and Guardia di Finanza: Are processed the data on felonies and people who were reported by police to the court Other data characteristics: Data referring to social demographic characteristics of alleged offenders could not coincide with data on reports because of the different timing of extraction from police forces database.The sum of the crimes by province could not coincide with the total of the region, and that of the regions with the total Italy, because of the missed precise statement, for some crimes, of the place where they have been committed (or of the region of the committed crime but not of the province).

AITRAW = All in average income tax rates at average wage   OECD Taxing Wages. Taxing Wages provides unique information on income tax paid by workers and social security contributions levied on employees and their employers in OECD countries. In addition, this annual publication specifies family benefits paid as cash transfers. Amounts of taxes and benefits are detailed program by program, for eight household types which differ by income level and household composition. Results reported include the marginal and effective tax burden for one- and two-earner families, and total labour costs of employers.

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers that measure the prices of residential properties over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. They can help, for example, to monitor potential macroeconomic imbalances and the risk exposure of the household and financial sectors. This dataset covers the 34 OECD member countries and some non-member countries. In addition to the nominal RPPIs it contains information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. This dataset contains quarterly statistics for each country. House prices differ widely across OECD countries, both with respect to recent changes and to valuation levels. The OECD has identified one main nominal index for each country that covers the prices for the sale of newly-built and existing dwellings. The datasets “Analytical house price indicators” and “Residential Property Price Indices (RPPIs) – Headline Indicators” refer to the same price indices for all countries apart from Brazil, Canada, China, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “Residential Property Price Indices (RPPIs) – Complete database”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap. This research dataset provides extended time series coverage for many countries. The objective is to provide information on the long term trend of house prices and develop indicators which can be used to help track and analyse macroeconomic developments and risks. The extended data supplement the OECD RPPI data with historical data from a variety of sources, including other international organisations, central banks and national statistical offices. The methodological basis on the historical data and the types of geographical areas and dwellings they cover can differ from those used in the OECD RPPI data. The database contains a number of additional series. Real house prices are given by the ratio of seasonally adjusted nominal house prices to the seasonally adjusted consumers’ expenditure deflator in each country, from the OECD national accounts database. This provides information on how nominal house prices have changed over time relative to prices in the general economy. The rental prices come from the OECD Main Economic Indicators database and refer to Consumer Price Indices (CPIs) for Actual rentals for housing (COICOP 04.1). If this indicator is missing for a country, another indicator is chosen. The chosen indicator are usually those corresponding to the CPI aggregate for Housing including Actual rentals for housing (COICOP 04.1), imputed rentals for housing (COICOP 04.2) and Maintenance and repair of the dwelling (COICOP 04.3). The disposable income indicators come from the OECD national accounts database. Net household disposable income is used. The population data come from the OECD national accounts database. The price-to-rent ratio is given by the ratio of nominal house prices to rental prices. This is a measure of the profitability of owning a house. The price-to-income ratio is given by the ratio of nominal house prices to nominal household disposable income per capita. This is a measure of the affordability of purchasing a house. An indication that house prices may be overvalued is provided if either of these ratios is above their long-term averages. The standardised price-rent and price-income ratios show the current price-rent and price-income ratios relative to their respective long-term averages. The long-term average, which is used as a reference value, is calculated over the whole period available when the indicator begins after 1980 or 1980 if the indicator is available over a longer time period. The standardised ratio is indexed to a reference value equal to 100 over the full sample period. Values over 100 indicate that the present price-rent ratio, or price-income ratio, is above its long-run norms. This provides an indication of possible housing market pressures.

The OECD's ANalytical Business Enterprise Research and Development (ANBERD) database presents annual data on Research and Development (R&D) expenditures by industry and was developed to provide analysts with comprehensive data on business R&D expenditures. The ANBERD database incorporates a number of estimations that build upon and extend national submissions of business enterprise R&D data by industry (main activity/industry orientation). The current version of the ANBERD database presents OECD countries' and selected non-member economies' business expenditure on R&D since 1987, broken down across 100 manufacturing and service industry groups. The reported data follow the International Standard Industrial Classification, Revision 4 (ISIC Rev. 4) and are expressed in national currencies as well as in US dollars at Purchasing Power Parity (PPP), both at current and constant prices.   Main activity and industry orientation: The 2015 Frascati Manual practice is to report BERD on an enterprise basis. The main economic activity of an enterprise is usually defined as that which accounts for most of its economic outputs; this may be identified directly from sales or indirectly proxied (such as by numbers of personnel devoted to different activities). This determines the industry in which the enterprise, and any BERD it carries out, is classified. As such, all BERD of a diversified enterprise (i.e. one with multiple lines of business) is allocated to the same industry, that of its main activity. This enables, as far as possible, the alignment and compatability of BERD data with other economic statistics (e.g. value added broken down by industry). In addition, the Frascati Manual also recommends reporting BERD by industry orientation, whereby the statistical unit’s R&D is distributed across the various lines of business to which it relates. In a few countries, hybrid approaches are followed and reported as main activity data. As an example, some countries primarily follow the main activity approach but redistribute the R&D of large diversified firms across the economic activities to which it relates. This can affect interpretation of the data and resulting statistics. There are also important differences between countries in the treatment of R&D undertaken by firms in the service sector but closely associated (though not necessarily contractually) with manufacturing firms. Industrial research institutes, largely funded by the manufacturing industries they serve, are the most frequent examples. With the implementation of the 2015 Frascati Manual, such hybrid data will be phased out in favour of a strict main activity approach. Countries still reporting hybrid data are flagged in the ANBERD country notes.

SA1 based data for Ancestry, Basic Community Profile Table B08, for 2011 Census ABS Census Homepage

LGA2011 based data for Ancestry by Birthplace of Parents, Time Series Profiles Table T09, for 2011 Census ABS Census Homepage

LGA2011 based data for Ancestry, Basic Community Profile Table B08, for 2011 Census ABS Census Homepage

Australia/State/SA4/SA3/SA2 based data for Ancestry by Birthplace of Parents, Time Series Profiles Table T09, for 2011 Census ABS Census Homepage

This indicator conveys the annual growth rates of labour productivity. Labour productivity represents the total volume of output (measured in terms of Gross Domestic Product, GDP) produced per unit of labour (measured in terms of the number of employed persons) during a given time reference period. The indicator allows data users to assess GDP-to-labour input levels and growth rates over time, thus providing general information about the efficiency and quality of human capital in the production process for a given economic and social context, including other complementary inputs and innovations used in production. For further information, see the SDG Indicators Metadata Repository or ILOSTAT's indicator description.

The dataset includes a detailed breakdown of Investment funds, Insurance companies and Pension funds, and Other forms of institutional savings, as institutional sectors. This finer breakdown by type of investors has been established with reference to the System of National Accounts (SNA), when possible. Within Investment funds, one distinguishes Open-end companies, further broken down into Money market funds and Other mutual funds, and Closed-end companies, of which Real estate funds. Within Insurance companies and pension funds one distinguishes Insurance companies, further broken down into Life insurance companies and Non-life insurance companies, and Autonomous pension funds. Financial assets included correspond to the assets requested in the previous database on Institutional Investors, i.e. Currency and deposits, Securities other than shares, Loans, Shares and other equities and Other financial assets. Moreover, Total non-financial assets are also included. While the sub-classification of the above financial assets corresponds to SNA93, a further breakdown between assets issued by residents and assets issued by non-residents is reported.

The “ALFS Summary tables” dataset is a subset of the Annual Labour Force Statistics database which presents annual labour force statistics and broad population series for 34 OECD member countries plus Brazil, Columbia and Russian Federation and 4 geographical areas (Major Seven, Euro area, European Union and OECD-Total). Data are presented in thousands of persons, in percentage or as indices with base year 2010=100. This dataset contains estimates from the OECD Secretariat for the latest years when countries did not provide data. These estimates are necessary to compile aggregated statistics for the geographical areas for a complete span of time. Since 2003, employment data by sector for the United States are compiled following the North American Industrial Classification System (NAICS); therefore they are not strictly comparable with other countries’ data. Euro area and European Union data were extracted from Eurostat (LFS Series, Detailed annual survey results in New Cronos). Euro area refer to Euro area with 17 countries (geo = ea17). European Union refers to European Union with 27 countries (geo = eu27).

AMECO is the annual macro-economic database of the European Commission's Directorate General for Economic and Financial Affairs. The database is indispensable for the analyses and reports of the Directorate General and contains data for EU-28, the euro area, EU Member States, candidate countries and other OECD countries. The database contains data for EU-28, the euro area, EU Member States, candidate countries and other OECD countries (United States, Japan, Canada, Switzerland, Norway, Iceland, Mexico, Korea, Australia and New Zealand). Data for Member States and candidate countries are based on the ESA 2010 system for the last period and on ESA 95 and ESA 79 for the earlier years. Data for other OECD countries are based on the SNA 2008. Discontinuities of the levels of all series have been removed by applying the growth rates of the old series to the levels of the new series.

ITTO's Annual Review and Assessment of the World Timber Situation compiles the most up-to-date and reliable international statistics available on global production and trade of timber, with an emphasis on the tropics. It also provides information on trends in forest area, forest management and the economies of ITTO member countries.

Data source used: The aquaculture production data collection is part of the more comprehensive data gathering carried out on an annual basis by the Fisheries Committee (COFI) of the Trade and Agriculture Directorate (TAD) from OECD members and participating non-OECD economies. Data on marine landings, aquaculture production, inland fisheries catch, fleet, employment, total allowable catch (TAC) and fisheries support estimate (FSE) are collected from Fisheries Ministries, National Statistics Offices and other institutions designated as an official data source. The surveys used for this exercise are the OECD Fisheries questionnaires.

AQUASTAT is FAO's global information system on water and agriculture, developed by the Land and Water Division. The main mandate of the program is to collect, analyze and disseminate information on water resources, water uses, and agricultural water management with an emphasis on countries in Africa, Asia, Latin America and the Caribbean. This allows interested users to find comprehensive and regularly updated information at global, regional, and national levels.

This dataset shows countries and river basins' average exposure to five of Aqueduct's water risk indicators: baseline water stress, interannual variability, seasonal variability, flood occurrence, and drought severity. Risk exposure scores are available for every country (except Greenland and Antarctica), the 100 most populous river basins, and the 100 largest river basins by area. Scores are also available for all industrial, agricultural, and domestic users' average exposure to each indicator in each country and river basin. Citation: Gassert, F., P. Reig, T. Luo, and A. Maddocks. 2013. “Aqueduct country and river basin rankings: a weighted aggregation of spatially distinct hydrological indicators.” Working paper. Washington, DC: World Resources Institute, November 2013. Available online at http://wri.org/publication/aqueduct-country-river-basin-rankings.

Suggested citation: Luo, T., R. Young, and P. Reig. 2015. "Aqueduct projected water stress rankings." Technical note. Washington, DC: World Resources Institute, August 215. Available online at http://www.wri.org/publication/aqueduct-projected-water-stress-country-rankings.    Supplemental Materials: Country Scores                         WRI projected future country-level water stress for 2020, 2030, and 2040 under business-as-usual (BAU), optimistic, and pessimistic scenarios. Each tab lists country projected water stress scores for each scenario and year, weighted by overall water withdrawals. Scores weighted by individual sectors (agricultural, domestic, and industrial) are provided as well.   These global projections are best suited to making comparisons among countries for the same year and among scenarios and decades for the same region. More detailed and localized data or scenarios can better estimate potential outcomes for specific regions and expose large sub-national variations that are subsumed under countrywide water-stress values. The country indicators face persistent limitations in attempting to simplify complex information, such as spatial and temporal variations, into a single number. They also do not account for the governance and investment structure of the water sector in different countries.    It is important to note the inherent uncertainty in estimating any future conditions, particularly those associated with climate change, future population and economic trends, and water demand. Additionally, care should be taken when examining the change rates of a country’s projected stress levels between one year and another, because the risk-score thresholds are not linear. For more information on these limitations, see the technical note.   Projections are described in further detail in: Luck, M., M. Landis, and F. Gassert, “Aqueduct Water Stress Projections: Decadal Projections of Water Supply and Demand Using CMIP5 GCMs,” Technical note (Washington, DC: World Resources Institute, April 2015), http://www.wri.org/publication/aqueduct-water-stress-projections.   Water Stress withdrawals / available flow Water stress measures total annual water withdrawals (municipal, industrial, and agricultural) expressed as a percentage of the total annual available blue water. Higher values indicate more competition among users. Score Value [0-1) Low (<10%) [1-2) Low to medium (10-20%) [2-3) Medium to high (20-40%) [3-4) High (40-80%) [4-5] Extremely high (>80%)    

Data cited at: Stockholm International Peace Research Institute (SIPRI)   The SIPRI Arms Transfers Database contains information on all transfers of major conventional weapons from 1950 to the most recent full calendar year. It is a unique resource for researchers, policy-makers and analysts, the media and civil society interested in monitoring and measuring the international flow of major conventional arms. For more information, see http://www.sipri.org/databases/armstransfers/sources-and-methods/

Ecuador: Arrival and Departure Statistics

Eurostat Dataset Id:tour_occ_arnrmw National data Monthly and annual data on arrivals, nights spent and occupancy rates at tourist accommodation establishments. Regional data Annual arrivals, nights spent at tourist accommodation establishments at NUTS 2 level. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

APD Regional Economic Outlook (REO) provides information on recent economic developments and prospects for countries in Asia and Pacific. Data for the REO for Asia and Pacific is prepared in conjunction with the semi-annual World Economic Outlook (WEO) exercises, spring and fall. Data are consistent with the projections underlying the WEO. REO aggregate data may differ from WEO aggregates due to differences in group membership. Composite data for country groups are weighted averages of data for individual countries. Arithmetic weighted averages are used for all concepts except for inflation and broad money, for which geometric averages are used. PPP GDP weights from the WEO database are used for the aggregation of real GDP growth, real non-oil GDP growth, real per capita GDP growth, investment, national savings, broad money, claims on the nonfinancial private sector, and real and nominal effective exchange rates. Aggregates for other concepts are weighted by GDP in U.S. dollars at market exchange rates.

Data cited at GLOBAL CORRUPTION BAROMETER 2015/16/17by Transparency International is licensed under CC-BY-ND 4.0. Global Corruption Barometer is the largest world-wide public opinion survey on corruption. see more at https://www.transparency.org/research/gcb/gcb_2015_16/0 In the most extensive survey of its kind, we spoke to 21,861 people in 16 countries, regions and territories across the Asia Pacific region between July 2015 and January 2017 about their perceptions and experiences of corruption. The survey results show a great diversity in the corruption risks across the region, but in every country surveyed there is scope for improved approaches to corruption prevention.

The data does not differentiate if airplane is used for GA or commercial operations. In 2006, the CAA stopped publishing the number of registered aircraft by weight in favor of classes.In 2012, the CAA began publishing aircraft registry statistics by aircraft class.

Data cited at:  CBS StatLine databank https://opendata.cbs.nl/statline/portal.html?_la=en&_catalog=CBS Publication: Asylum requests; international https://opendata.cbs.nl/portal.html?_la=en&_catalog=CBS&tableId=80498ENG&_theme=1088 License: http://creativecommons.org/licenses/by/4.0/   Requests for asylum in member states of the European Union and some countries outside the European Union. In addition to the total number of asylum requests, the number of first asylum requests is also included. The data with respect to EU member states in this table is based on data from Eurostat and is partly different from data published in the table Asylum requests; international 1990-2009. See link section 3. The figures for the countries outside the European Union are submitted by the UNHCR. Data available from: 2008. Status of the figures: The data are final, but it occasionally happens that countries provide revised data. Therefore, the data in the table may be subject to change. Changes as of 22 December 2017: The figures for EU-28, Austria, France, Ireland and the United Kingdom have been adjusted for the year 2016 and the figure for Canada has been adjusted for the year 2015. The figures for Canada and Australia have been added for the year 2016. For the United States there is no current figure available for the year 2016. When will new figures be published? Figures for 2017 will be published in April 2018.

The Australian Census Longitudinal Dataset (ACLD) is Australia's largest longitudinal dataset bringing together a 5% random sample of around one million records from the 2006 Census with corresponding records from the 2011 Census. It provides a unique opportunity for researchers and policy makers to examine pathways and transitions of population groups, such as unemployed individuals transition into the labour force. Over time, the ACLD will continue to grow as records from each new Census are linked which will further enhance its longitudinal view. The ACLD will also be augmented in the future to take account of migration and births that occur between Censuses.

Australia: B02 Selected Medians and Averages Australia/State/SA4/SA3/SA2 based data for Selected Medians and Averages, Basic Community Profile Table B02, for 2011 Census

Automotive Industry, 2014

The concept used is the total number of hours worked over the year divided by the average number of people in employment. The data are intended for comparisons of trends over time; they are unsuitable for comparisons of the level of average annual hours of work for a given year, because of differences in their sources. Part-time workers are covered as well as full-time workers. The series on annual hours actually worked per person in total employment presented in this table for all 34 OECD countries are consistent with the series retained for the calculation of productivity measures in the OECD Productivity database (www.oecd.org/statistics/productivity/compendium). However, there may be some differences for some countries given that the main purpose of the latter database is to report data series on labour input (i.e. total hours worked) and also because the updating of databases occur at different moments of the year. Hours Hours actually worked per person in employment are according to National Accounts concepts for 18 countries: Austria, Canada, the Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Italy, Korea, the Netherlands, Norway, the Slovak Republic, Spain, Sweden, Switzerland and Turkey. OECD estimates for Belgium, Ireland, Luxembourg and Portugal for annual hours worked are based on the European Labour Force Survey, as are estimates for dependent employment only for Austria, Estonia, Greece, the Slovak Republic and Slovenia. The table includes labour-force-survey-based estimates for the Russian Federation.countries: For further details and country specfic notes see: www.oecd.org/employment/outlook and www.oecd.org/employment/emp/ANNUAL-HOURS-WORKED.pdf

This dataset contains data on average annual wages per full-time and full-year equivalent employee in the total economy.  Average annual wages per full-time equivalent dependent employee are obtained by dividing the national-accounts-based total wage bill by the average number of employees in the total economy, which is then multiplied by the ratio of average usual weekly hours per full-time employee to average usually weekly hours for all employees.   Average wages are converted in USD PPPs using 2017 USD PPPs for private consumption and are deflated by a price deflator for private final consumption expenditures in 2017 prices.   Real compensation per employee (instead of real wages) are considered for Chile, Iceland, Mexico and New Zealand.

This dataset presents the average number of students in a class by type of institution.

This table contains data on the average duration of unemployment by sex and standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total). Data are expressed in months.

The average effective age of retirement is calculated as a weighted average of (net) withdrawals from the labour market at different ages over a 5-year period for workers initially aged 40 and over. In order to abstract from compositional effects in the age structure of the population, labour force withdrawals are estimated based on changes in labour force participation rates rather than labour force levels. These changes are calculated for each (synthetic) cohort divided into 5-year age groups. The estimates shown in red are less reliable as they have been derived from interpolations of census data rather than from annual labour force surveys. The estimates for women in Turkey are based on 3-yearly moving averages of participation rates for each 5-year age group. OECD estimates based on the results of national labour force surveys, the European Union Labour Force Survey and, for earlier years in some countries, national censuses.

The concept of earnings, as applied in wages statistics, relates to gross remuneration in cash and in kind paid to employees, as a rule at regular intervals, for time worked or work done together with remuneration for time not worked, such as annual vacation, other type of paid leave or holidays. This indicator is presented in terms of the average monthly earnings per employee, in local currency.

The concept of earnings, as applied in wages statistics, relates to gross remuneration in cash and in kind paid to employees, as a rule at regular intervals, for time worked or work done together with remuneration for time not worked, such as annual vacation, other type of paid leave or holidays. This indicator is presented in terms of the average monthly earnings per employee, in local currency, for men.

The concept of earnings, as applied in wages statistics, relates to gross remuneration in cash and in kind paid to employees, as a rule at regular intervals, for time worked or work done together with remuneration for time not worked, such as annual vacation, other type of paid leave or holidays. This indicator is presented in terms of the average monthly earnings per employee, in local currency, for women.

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

U.S. Direct Investment Abroad: Balance of Payments and Direct Investment Position 

The balance of payments is a statistical statement that provides a systematic summary of economic transactions of an economy with the rest of the world, for a specific time period. The transactions are for the most part between residents and non-residents of the economy. A transaction is defined as an economic flow that reflects the creation, transformation, exchange, transfer, or extinction of economic value and involves changes in ownership, of goods or assets, the provision of services, labour or capital.  This dataset presents countries compiling balance of payments statistics in accordance with the 6th edition of the Balance of Payments and International Investment Position Manual published by the IMF (BPM6). Transactions include: the goods and services accounts, the primary income account (income account in BPM5), the secondary income account (transfers in BPM5), the capital account, and the financial account. Changes in BPM6 compared to BPM5 are often a consequence of a stricter application of the change of ownership principle in particular in the goods and services accounts. They relate to transactions on goods and services (merchanting, goods for processing, Insurance), income (investment income), and financial operations (direct investment) .

Annual statistics of Malaysia's balance of payment as time series 1947 - 2017.

BOPSY Global Tables aggregate country data by major balance of payments components and by international investment position (IIP) data for (i) Net IIP and (ii) Total Assets and Total Liabilities. Data for countries, country groups, and the world are provided. In addition to data reported by countries as shown in BOPSY, balance of payments data are provided for international organizations in BOPSY Global Tables. The BOPSY Global Tables include, in addition to reported data, data derived in a few instances indirectly from published sources.

Since the collection of 2009 data, the scope of the OECD Global Insurance Statistics questionnaire has been expanded. These changes led to the collection of key balance sheet and income statement items for direct insurance and reinsurance sectors, such as: gross claims paid, outstanding claims provision (changes), gross operating expenses, commissions, total assets, gross technical provisions (of which: unit-linked), shareholder equity, net income.

Data cited at: Barro-Lee  

Data cited at: Barro-Lee

Sugar Data of United States

Better Life Index aims to involve citizens in the debate on measuring the well-being of societies, and to empower them to become more informed and engaged in the policy-making process that shapes all our lives. Each of the 11 topics of the Index is currently based on one to three indicators. Within each topic, the indicators are averaged with equal weights. The indicators have been chosen on the basis of a number of statistical criteria such as relevance (face-validity, depth, policy relevance) and data quality (predictive validity, coverage, timeliness, cross-country comparability etc.) and in consultation with OECD member countries. These indicators are good measures of the concepts of well-being, in particular in the context of a country comparative exercise. Other indicators will gradually be added to each topic.

UNCTAD's Bilateral FDI Statistics provides up-to-date and systematic FDI data for 206 economies around the world, covering inflows (table 1), outflows (table 2), inward stock (table 3) and outward stock (table 4) by region and economy. Data are in principle collected from national sources. In order to cover the entire world, where data are not available from national sources, data from partner countries (mirror data) as well as from other international organizations have also been used.

This data set provides a snapshot of migration and remittances for all countries, regions and income groups of the world, compiled from available data from various sources

Both ethanol and biodiesel are classified under the HS-6 digit categories that also contain other products. Biodiesel is an industrial product (as it is produced through a chemical process called transesterification) and classified under HS code 382490 - products, preparations and residual products of the chemical or allied industries not elsewhere specified. Ethanol is classified as an agriculture product under HS code 2207, which covers un-denatured (HS 2207 10) and denatured alcohol (HS 2207 20).

'Statistics on high-tech industry and knowledge-intensive services' (sometimes referred to as simply 'high-tech statistics') comprise economic, employment and science, technology and innovation (STI) data describing manufacturing and services industries or products traded broken down by technological intensity. The domain uses various other domains and sources of  Eurostat's official statistics (CIS, COMEXT, HRST, LFS, PATENT, R&D and SBS) and its coverage is therefore dependent on these other primary sources. Two main approaches are used in the domain to identify technology-intensity: the sectoral approach and the product approach. A third approach is used for data on high-tech and biotechnology patents aggregated on the basis of the International Patent Classification (IPC) 8th edition (see summary table in Annex 1 for which approach is used by each type of data). The sectoral approach: The sectoral approach is an aggregation of the manufacturing industries according to technological intensity (R&D expenditure/value added) and based on the Statistical classification of economic activities in the European Community (NACE)  at 2-digit level. The level of R&D intensity served as a criterion of classification of economic sectors into high-technology, medium high-technology, medium low-technology and low-technology industries. Services are mainly aggregated into knowledge-intensive services (KIS) and less knowledge-intensive services (LKIS) based on the share of tertiary educated persons at NACE 2-digit level. The sectoral approach is used for all indicators except data on high-tech trade and patents. Note that due to the revision of the NACE from NACE Rev. 1.1 to NACE Rev. 2 the definition of high-technology industries and knowledge-intensive services has changed in 2008. For high-tech statistics it means that two different definitions (one according NACE Rev. 1.1 and one according NACE Rev. 2) are used in parallel and the data according to both NACE versions are presented in separated tables depending on the data availability. For example as the LFS provides the results both by NACE Rev. 1.1 and NACE Rev. 2, all the table using this source have been duplicated to present the results by NACE Rev. 2 from 2008. For more details, see both definitions of high-tech sectors under Annexes section. Within the sectoral approach, a second classification was created , named Knowledge Intensive Activities KIA) and based on the share of tertiary educated people in each sectors of industries and services according to NACE at 2-digit level and for all EU28 Member States. A threshold was applied to judge sectors as knowledge intensive. In contrast to first sectoral approach mixing two methodologies, one for manufacturing industries and one for services, the KIA classification is based on one methodology for all the sectors of industries and services covering even public sector activities. The aggregations in use are Total Knowledge Intensive Activities (KIA) and Knowledge Intensive Activities in Business Industries (KIABI). Both classifications are made according to NACE Rev. 1.1 and NACE Rev. 2 at 2- digit level. Note that due to revision of the NACE Rev.1.1 to NACE Rev. 2 the list of Knowledge Intensive Activities has changed as well, the two definitions are used in parallel and the data are shown in two separate tables. NACE Rev.2 collection includes data starting from 2008 reference year. For more details please see the definitions under Annexes section. The product approach: The product approach was created to complement the sectoral approach and it is used for data on high-tech trade. The product list is based on the calculations of R&D intensity by groups of products (R&D expenditure/total sales). The groups classified as high-technology products are aggregated on the basis of the Standard International Trade Classification (SITC). The initial definition was built based on SITC Rev.3 and served to compile the high-tech product aggregates until 2007. With the implementation in 2007 of the new version of SITC Rev.4, the definition of high-tech groups was revised and adapted according to new classification. Starting from 2007 the Eurostat presents the trade data for high-tech groups aggregated based on the SITC Rev.4. . For more details, see definition of high-tech products under Annexes section. High-tech patents: High-tech patents are defined according to another approach. The groups classified as high-tech patents are aggregated on the basis of the International Patent Classification (IPC 8th edition). Biotechnology patents are also aggregated on the basis of the IPC 8th edition. For more details, see the aggregation list of high-tech and biotechnology patents under Annexes section. The high-tech domain also comprises the sub-domain Venture Capital Investments: data are provided by INVEST Europe (formerly named the European Private Equity and Venture Capital Association EVCA). More details are available in the Eurostat metadata under Venture capital investments. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

'Statistics on high-tech industry and knowledge-intensive services' (sometimes referred to as simply 'high-tech statistics') comprise economic, employment and science, technology and innovation (STI) data describing manufacturing and services industries or products traded broken down by technological intensity. The domain uses various other domains and sources of  Eurostat's official statistics (CIS, COMEXT, HRST, LFS, PATENT, R&D and SBS) and its coverage is therefore dependent on these other primary sources. Two main approaches are used in the domain to identify technology-intensity: the sectoral approach and the product approach. A third approach is used for data on high-tech and biotechnology patents aggregated on the basis of the International Patent Classification (IPC) 8th edition (see summary table in Annex 1 for which approach is used by each type of data). The sectoral approach: The sectoral approach is an aggregation of the manufacturing industries according to technological intensity (R&D expenditure/value added) and based on the Statistical classification of economic activities in the European Community (NACE)  at 2-digit level. The level of R&D intensity served as a criterion of classification of economic sectors into high-technology, medium high-technology, medium low-technology and low-technology industries. Services are mainly aggregated into knowledge-intensive services (KIS) and less knowledge-intensive services (LKIS) based on the share of tertiary educated persons at NACE 2-digit level. The sectoral approach is used for all indicators except data on high-tech trade and patents. Note that due to the revision of the NACE from NACE Rev. 1.1 to NACE Rev. 2 the definition of high-technology industries and knowledge-intensive services has changed in 2008. For high-tech statistics it means that two different definitions (one according NACE Rev. 1.1 and one according NACE Rev. 2) are used in parallel and the data according to both NACE versions are presented in separated tables depending on the data availability. For example as the LFS provides the results both by NACE Rev. 1.1 and NACE Rev. 2, all the table using this source have been duplicated to present the results by NACE Rev. 2 from 2008. For more details, see both definitions of high-tech sectors under Annexes section. Within the sectoral approach, a second classification was created , named Knowledge Intensive Activities KIA) and based on the share of tertiary educated people in each sectors of industries and services according to NACE at 2-digit level and for all EU28 Member States. A threshold was applied to judge sectors as knowledge intensive. In contrast to first sectoral approach mixing two methodologies, one for manufacturing industries and one for services, the KIA classification is based on one methodology for all the sectors of industries and services covering even public sector activities. The aggregations in use are Total Knowledge Intensive Activities (KIA) and Knowledge Intensive Activities in Business Industries (KIABI). Both classifications are made according to NACE Rev. 1.1 and NACE Rev. 2 at 2- digit level. Note that due to revision of the NACE Rev.1.1 to NACE Rev. 2 the list of Knowledge Intensive Activities has changed as well, the two definitions are used in parallel and the data are shown in two separate tables. NACE Rev.2 collection includes data starting from 2008 reference year. For more details please see the definitions under Annexes section. The product approach: The product approach was created to complement the sectoral approach and it is used for data on high-tech trade. The product list is based on the calculations of R&D intensity by groups of products (R&D expenditure/total sales). The groups classified as high-technology products are aggregated on the basis of the Standard International Trade Classification (SITC). The initial definition was built based on SITC Rev.3 and served to compile the high-tech product aggregates until 2007. With the implementation in 2007 of the new version of SITC Rev.4, the definition of high-tech groups was revised and adapted according to new classification. Starting from 2007 the Eurostat presents the trade data for high-tech groups aggregated based on the SITC Rev.4. . For more details, see definition of high-tech products under Annexes section. High-tech patents: High-tech patents are defined according to another approach. The groups classified as high-tech patents are aggregated on the basis of the International Patent Classification (IPC 8th edition). Biotechnology patents are also aggregated on the basis of the IPC 8th edition. For more details, see the aggregation list of high-tech and biotechnology patents under Annexes section. The high-tech domain also comprises the sub-domain Venture Capital Investments: data are provided by INVEST Europe (formerly named the European Private Equity and Venture Capital Association EVCA). More details are available in the Eurostat metadata under Venture capital investments. Please note that for paragraphs where no metadata for regional data has been specified, the regional metadata is identical to the metadata provided for the national data.

Contains statistics on live births and fertility for Australia, states and territories, based on calendar year of registration data. Information on characteristics of the mother and child include place of usual residence, sex, Indigenous status, age, marital status and country of birth of parents.

Contains statistics on live births and fertility for Australia, states and territories, based on calendar year of registration data. Information on characteristics of the mother and child include place of usual residence, sex, Indigenous status, age, marital status and country of birth of parents.

Australia: Population clock component data This dataset contains data used in determining the ABS Population Clock. The data is annual data updated quarterly, and is based on past component data published in Australian Demographic Statistics (cat. no. 3101.0) with the net overseas migration estimate drawing on information provided by the Department of Home Affairs. These data are produced for the population clock only, and do not constitute official ABS projections.

Data cited at : https://www.bis.org/statistics/index.htm

Data cited at : https://www.bis.org/statistics/index.htm

The residential property price statistics collect data from different countries. The BIS has obtained permission from various national data providers, with the assistance of its member central banks, to disseminate these statistics. The topic ‘Property prices: Selected series,’ contains nominal and real quarterly values for 58 countries, both in levels and in growth rates (ie four series per country). Real series are the nominal price series deflated by the consumer price index. The BIS has made the selection based on the Handbook on Residential Property Prices and the experience and metadata of central banks.   Data cited at : https://www.bis.org/statistics/index.htm

Bloom Consulting was founded in 2003 as a Nation Branding consultancy. Our Headquarters are located in Madrid, with offices in Lisbon and São Paulo. Bloom Consulting has been interviewed by The Economist, Forbes and CNN . According to Country Branding Central www.countrybrandingwiki.org, our CEO José Filipe Torres, a recurrent lecturer in Universities such as Harvard, is considered one of the top 3 international experts in the field of Nation Branding, Region and City Branding, providing advisory for the OECD. In addition, Bloom Consulting publishes the Bloom Consulting Country Brand Ranking © annually for both Trade and Tourism, to extensively analyze the brand performance of 193 countries and territories worldwide and the Digital Country Index - Measuring the Brand appeal of countries and territories in the Digital World.

BP Energy Outlook Charts Data Pack - 2019 edition The Energy Outlook considers different aspects of the energy transition and the key issues and uncertainties these raise.   In all the scenarios considered, world GDP more than doubles by 2040 driven by increasing prosperity in fast-growing developing economies. In the Evolving transition (ET) scenario this improvement in living standards causes energy demand to increase by around a third over the Outlook, driven by India, China and Other Asia which together account for two-thirds of the increase. Despite this increase in energy demand, around two-thirds of the world’s population in 2040 still live in countries where average energy consumption per head is relatively low, highlighting the need for ‘more energy’. Energy consumed within industry and buildings accounts for around three-quarters of the increase in energy demand. Growth in transport demand slows sharply relative to the past, as gains in vehicle efficiency accelerate. The share of passenger vehicle kilometres powered by electricity increases to around 25% by 2040, supported by the growing importance of fully-autonomous cars and shared-mobility services.

The BP Statistical Review of World Energy has provided high-quality, objective and globally consistent data on world energy markets. The Review is one of the most widely respected and authoritative publications in the field of energy economics, used for reference by the media, academia, world governments and energy companies. A new edition is published every June. Historical data from 1965 for many sections.

Data given in this domain are collected annually by the National Statistical Institutes and are based on Eurostat's annual model questionnaires on ICT (Information and Communication Technologies) usage in households and by individuals. Large part of the data collected are used in the context of the follow up of the Digital Single Market process (Monitoring the Digital Economy & Society  2016-2021). This conceptual framework follows the 2011 - 2015 benchmarking framework, the i2010 Benchmarking Framework and the eEurope 2005 Action Plan. ICT usage data are also used in the Consumer Conditions Scoreboard (purchases over the Internet) and in the Employment Guidelines (e-skills of individuals). The aim of the European ICT surveys is the timely provision of statistics on individuals and households on the use of Information and Communication Technologies at European level. Data for this collection are supplied directly from the surveys with no separate treatment. Coverage: The characteristics to be provided are drawn from the following list of subjects:access to and use of ICTs by individuals and/or in households,use of the Internet and other electronic networks for different purposes by individuals and/or in households,ICT security and trust,ICT competence and skills,barriers to the use of ICT and the Internet,perceived effects of ICT usage on individuals and/or on households,use of ICT by individuals to exchange information and services with governments and public administrations (e-government),access to and use of technologies enabling connection to the Internet or other networks from anywhere at any time (ubiquitous connectivity). Breakdowns (see details of available breakdowns): Relating to households:by region of residence (NUTS 1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area) by type of householdby households net monthly income (optional) Relating to individuals:by region of residence (NUTS1, optional: NUTS 2)by geographical location: less developed regions, transition regions, more developed regionsby degree of urbanisation: (till 2012: densely/intermediate/sparsely populated areas; from 2012: densely/thinly populated area, intermediate density area)by genderby country of birth, country of citizenship (as of 2010, optional in 2010)by educational level: ISCED 1997 up to 2013 and ISCED 2011 from 2014 onwards.by occupation: manual, non-manual; ICT (coded by 2-digit ISCO categories)/non-ICT (optional: all 2-digit ISCO categories)by employment situationby age (in completed years and by groups)legal / de facto marital status (2011-2014, optional) Regional breakdowns (NUTS) are available only for a selection of indicators disseminated in the regional tables in Eurobase (Regional Information society statistics by NUTS regions (isoc_reg):Households with access to the internet at homeHouseholds with broadband accessIndividuals who have never used a computerIndividuals who used the internet, frequency of use and activitiesIndividuals who used the internet for interaction with public authoritiesIndividuals who ordered goods or services over the internet for private useIndividuals who accessed the internet away from home or work

The OECD broadband portal provides access to a range of broadband-related statistics gathered by the OECD. Policy makers must examine a range of indicators which reflect the status of individual broadband markets. The OECD broadband speed tests by country show the official measurements of actual access network broadband speed. The OECD broadband map shows national broadband statistics in OECD countries. Mobile broadband penetration has risen to 85.4% in the OECD area, meaning more than four wireless subscriptions for every five inhabitants, according to data for June 2015 released by the OECD .

Business and Financial Statistics of Australia, by Region

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2000 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics performed in the business enterprise sector by industry according to the International Standard Industrial Classification (ISIC) revision 3.1. and by type of costs (current expenditure, capital expenditure). Data at the industry level are presented beginning 1987, year when most of the countries converted from ISIC rev.2 to the current ISIC rev. 3 classification. This breakdown between industries is, in principle, made at the enterprise level, although some countries are able to break down R&D data for multi product enterprises between their main lines of business. National statistical regulations prevent publication of results where there are very few firms in the given category, hence the many gaps in the tables. Depending on the country, R&D institutes serving enterprises are either classified with the industry concerned, or grouped under “Research and Development” (ISIC rev.3.1, Division 73). When these R&D institutes are classified with the industry served, the evaluation of R&D in these industries is more complete and more comparable between countries for the industries concerned. This results, however, in an underestimation of the percentage of BERD performed by the service sector as compared with other countries. The Frascati Manual recommendation concerning data on R&D by industry is to report BERD on an enterprise basis (see FM section 3.4). When this is interpreted strictly, all the BERD of a diversified enterprise will be allocated to the industrial class of its principal activity. In circumstances where a few large firms dominate R&D spending in several areas, this can and does lead to underestimates of R&D associated with the secondary activities of the firms. Overall, R&D is therefore overestimated for some industries and underestimated for others. However, not all countries follow a strict enterprise basis for allocating R&D expenditures to industrial classes. Some countries make a disaggregation of the R&D of their largest, diversified firms into a number of different activities. In other countries, the enterprise approach has been abandoned and data are reported on a product field basis. This is why two classification criteria for BERD by industry are included in the table “BERD by industry” (see the variable CLASSIFICATION CRITERIA: Main activity or Product field) depending on which approach is more closely followed by each country (only a few countries currently collect these data both ways and are therefore included according to both criteria). However, this table “BERD by industry and type of costs” and the preceding one “BERD by industry and source of funds” present data for only one of the criteria, depending on the country.

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics performed in the business enterprise sector by industry according to the International Standard Industrial Classification (ISIC) revision 3.1. Data at the industry level are presented beginning 1987, year when most of the countries converted from ISIC rev.2 to the current ISIC rev. 3 classification. This breakdown between industries is, in principle, made at the enterprise level, although some countries are able to break down R&D data for multi product enterprises between their main lines of business. National statistical regulations prevent publication of results where there are very few firms in the given category, hence the many gaps in the tables. Depending on the country, R&D institutes serving enterprises are either classified with the industry concerned, or grouped under “Research and Development” (ISIC rev.3.1, Division 73). When these R&D institutes are classified with the industry served, the evaluation of R&D in these industries is more complete and more comparable between countries for the industries concerned. This results, however, in an underestimation of the percentage of BERD performed by the service sector as compared with other countries. The Frascati Manual recommendation concerning data on R&D by industry is to report BERD on an enterprise basis (see FM section 3.4). When this is interpreted strictly, all the BERD of a diversified enterprise will be allocated to the industrial class of its principal activity. In circumstances where a few large firms dominate R&D spending in several areas, this can and does lead to underestimates of R&D associated with the secondary activities of the firms. Overall, R&D is therefore overestimated for some industries and underestimated for others. However, not all countries follow a strict enterprise basis for allocating R&D expenditures to industrial classes. Some countries make a disaggregation of the R&D of their largest, diversified firms into a number of different activities. In other countries, the enterprise approach has been abandoned and data are reported on a product field basis. This is why two classification criteria for BERD by industry are included in this view of “BERD by industry” (see the variable CLASSIFICATION CRITERIA: Main activity or Product field) depending on which approach is more closely followed by each country (only a few countries currently collect these data both ways and are therefore included according to both criteria)). The two tables that follow, “BERD by industry and source of funds” and “BERD by industry and type of costs” present data for only one of the criteria, depending on the country.

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics performed in the business enterprise sector by industry according to the International Standard Industrial Classification (ISIC) revision 3.1. and by source of funds (business enterprise, government, other national funds, and funds from abroad). Data at the industry level are presented beginning 1987, year when most of the countries converted from ISIC rev.2 to the current ISIC rev. 3 classification. This breakdown between industries is, in principle, made at the enterprise level, although some countries are able to break down R&D data for multi product enterprises between their main lines of business. National statistical regulations prevent publication of results where there are very few firms in the given category, hence the many gaps in the tables. Depending on the country, R&D institutes serving enterprises are either classified with the industry concerned, or grouped under “Research and Development” (ISIC rev.3.1, Division 73). When these R&D institutes are classified with the industry served, the evaluation of R&D in these industries is more complete and more comparable between countries for the industries concerned. This results, however, in an underestimation of the percentage of BERD performed by the service sector as compared with other countries. The Frascati Manual recommendation concerning data on R&D by industry is to report BERD on an enterprise basis (see FM section 3.4). When this is interpreted strictly, all the BERD of a diversified enterprise will be allocated to the industrial class of its principal activity. In circumstances where a few large firms dominate R&D spending in several areas, this can and does lead to underestimates of R&D associated with the secondary activities of the firms. Overall, R&D is therefore overestimated for some industries and underestimated for others. However, not all countries follow a strict enterprise basis for allocating R&D expenditures to industrial classes. Some countries make a disaggregation of the R&D of their largest, diversified firms into a number of different activities. In other countries, the enterprise approach has been abandoned and data are reported on a product field basis. This is why two classification criteria for BERD by industry are included in the table “BERD by industry” (see the variable CLASSIFICATION CRITERIA: Main activity or Product field) depending on which approach is more closely followed by each country (only a few countries currently collect these data both ways and are therefore included according to both criteria). However, this table “BERD by industry and source of funds” and the one that follows, “BERD by industry and type of costs” present data for only one of the criteria, depending on the country.

Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2010 prices and PPPs). Variables collected This table presents research and development (R&D) expenditure statistics performed in the business enterprise sector. Data include total business enterprise intramural expenditure on R&D by size class and source of funds.

This table presents research and development (R&D) statistics on personnel in the business enterprise sector. Measured in full-time equivalent are the number of total R&D personnel and researchers in the business enterprise sector by industry according to the International Standard Industrial Classification (ISIC) revision 3.1. Data at the industry level are presented beginning 1987, year when most of the countries converted from ISIC rev.2 to the current ISIC rev. 3 classification.

Data cited at: The World Bank https://datacatalog.worldbank.org/ Topic: Jobs Publication: https://datacatalog.worldbank.org/dataset/jobs License: http://creativecommons.org/licenses/by/4.0/   The World Bank Jobs Statistics Over 150 indicators on labor-related topics, covering over 200 economies from 1990 to present.

Contains quarterly estimates of profits, income from the sale of goods and services, wages and salaries, and the book value of inventories. These data are classified by broad industry, and original, seasonally adjusted and trend estimates are included for Australia, in current price terms. Volume measures are published for sales and inventories. State/territory data will also be included for sales, and wages and salaries, in current price terms.

The business tendency survey indicators cover a standard set of indicators for four economic sectors: manufacturing, construction, retail trade and other services. This includes an indicator of overall business conditions or business confidence in each sector. The consumer opinion survey indicators cover a restricted set of indicators on consumer confidence, expected economic situation and price expectations.   Business and consumer opinion (tendency) surveys provide qualitative information that has proved useful for monitoring the current economic situation. Typically they are based on a sample of enterprises or households and respondents are asked about their assessments of the current situation and expectations for the immediate future. For enterprise surveys this concerns topics such as production, orders, stocks etc. and in the case of consumer surveys their intentions concerning major purposes, economic situation now compared with the recent past and expectations for the immediate future. Many survey series provide advance warning of turning points in aggregate economic activity as measured by GDP or industrial production. Such series are known as leading indicators in cyclical analysis. These types of survey series are widely used as component series in composite leading indicators.   The main characteristic of these types of surveys is that instead of asking for exact figures, they usually ask for the direction of change e.g. a question on tendency by reference to a “normal” state, e.g. of production level. Possible answers are generally of the three point scale type e.g. up/same/down or above normal/normal/below normal for enterprise surveys and of the five point scale type e.g. increase sharply/increase slightly/remain the same/fall slightly/fall sharply for consumer surveys. In presenting the results as a time series, only the balance is shown. That is “same” or “normal” answers are ignored and the balance is obtained by taking the difference between percentages of respondents giving favourable and unfavourable answers.   Virtually all business tendency and consumer opinion survey data are presented as time series of balances in this dataset, either in raw or seasonally adjusted form. Very few series are presented as indices, and where these exist they have generally been converted from underlying balances by countries before submitting the data to the OECD.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Business written in the reporting country on a gross and net premium basis. It contains a breakdown between domestic companies, foreign-controlled companies and branches and agencies or foreign companies.

Внешняя торговля товарами Российской Федерации по странам партнерам, 1995-2011

Data Citation: CAIT Climate Data Explorer. 2017. Washington, DC: World Resources Institute. Available online at: http://cait.wri.org   CAIT data carries a Creative Commons Attribution-NonCommercial 4.0 International license   CAIT Historic allows for easy access, analysis and visualization of the latest available international greenhouse gas emissions data. It includes information for 186 countries, 50 U.S. states, 6 gases, multiple economic sectors, and 160 years - carbon dioxide emissions for 1850-2012 and multi-sector greenhouse gas emission for 1990-2012.

This dataset is updated with data obtained from Statistics Canada and the U.S. Census Bureau. Current data June 2018. Trade Data is updated on a monthly and annual basis, with revisions in March, April, May, August and November to previous year's data. Trade Data is available on both product and industry-based versions. The product Trade Data is classified by Harmonized System (HS) codes while the industry data is based on North American Industry Classification System(NAICS) classification codes. Source: Statistics Canada and the U.S.Census Bureau

For the location "Puerto Rico" data is available from 1990.

Data cited: Global Burden of Disease Collaborative Network. Global Burden of Disease Study 2016 (GBD 2016) Cancer Incidence, Mortality, Years of Life Lost, Years Lived with Disability, and Disability-Adjusted Life Years 1990-2016. Seattle, United States: Institute for Health Metrics and Evaluation (IHME), 2018.   The Global Burden of Disease Study 2016 (GBD 2016), coordinated by the Institute for Health Metrics and Evaluation (IHME), estimated the burden of diseases, injuries, and risk factors for 195 countries and territories and at the subnational level for a subset of countries. Estimates for deaths, disability-adjusted life years (DALYs), years lived with disability (YLDs), years of life lost (YLLs), prevalence, and incidence for 29 cancer groups by age and sex for 1990-2016 are available from the GBD Results Tool. Files available in this record are the web tables published in JAMA Oncology in June 2018 in "Global, Regional, and National Cancer Incidence, Mortality, Years of Life Lost, Years Lived With Disability, and Disability-Adjusted Life-years for 29 Cancer Groups, 1990 to 2016."

OICA Car Production Statistics 1999-2018 contains world motor vehicle production statistics, obtained from national trade organisations, OICA members or correspondents. Passenger cars are motor vehicles with at least four wheels, used for the transport of passengers, and comprising no more than eight seats in addition to the driver's seat. Commercial vehicles include light commercial vehicles, heavy trucks, coaches and buses.

World: Car Sales by Country 2017

Indicators in the OECD database on Carbon dioxide (CO2) emissions embodied in international trade are derived by combining the 2015 version of OECD's Inter-Country Input-Output (ICIO) Database with International Energy Agency (IEA) statistics on CO2 emissions from fuel combustion. Production-based CO2 emissions are estimated by allocating the IEA CO2 emissions to the 34 target industries in OECD ICIO and, to final demand for fuels, by both residents and non-residents. Consumption-based CO2 emissions are calculated by multiplying the intensities of the production-based emissions (c) with the global Leontief inverse (I-A)(-1) and global final demand matrix (Y) from OECD ICIO, taking the column sums of the resulting matrix and adding residential and private road emissions (FNLC), i.e. direct emissions from final demand: colsum [ diag(c) (I-A)(-1) Y ] + FNLC. The ICIO system includes discrepancies in the trade data (referred to as DISC). Emissions allocated to DISC are made explicit (e.g. in indicator FD_CO2). This ensures that global CO2 production equals global CO2 consumption.

Japan: Shipping Statistics Handbook, Harbour

A case of occupational injury is the case of a worker incurring an occupational injury as a result of an occupational accident. An occupational injury that is fatal is the result of an occupational accident where death occurred within one year from the day of the accident. Data are disaggregated by economic activity according to the latest version of the International Standard Industrial Classification of All Economic Activities (ISIC) available for that year. Economic activity refers to the main activity of the establishment in which a person worked during the reference period and does not depend on the specific duties or functions of the person's job, but on the characteristics of the economic unit in which this person works.

A case of occupational injury is the case of a worker incurring an occupational injury as a result of an occupational accident. An occupational injury that is fatal is the result of an occupational accident where death occurred within one year from the day of the accident.

A case of non-fatal occupational injury is the case of a worker incurring an occupational injury as a result of an occupational accident not leading to death. The non-fatal occupational injury entails a loss of working time. Data are disaggregated by economic activity according to the latest version of the International Standard Industrial Classification of All Economic Activities (ISIC) available for that year. Economic activity refers to the main activity of the establishment in which a person worked during the reference period and does not depend on the specific duties or functions of the person's job, but on the characteristics of the economic unit in which this person works.

A case of non-fatal occupational injury is the case of a worker incurring an occupational injury as a result of an occupational accident not leading to death. The non-fatal occupational injury entails a loss of working time.

A case of non-fatal occupational injury is the case of a worker incurring a non-fatal occupational injury as a result of an occupational accident, which entailed a loss of working time. Incapacity for work is the inability of the victim of an occupational accident, due to an occupational injury, to perform the normal duties of work in the job or post occupied at the time of the occupational accident. The incapacity for work can be permanent, when the persons injured were never able to perform again the normal duties of work in the job or post occupied at the time of the occupational accident causing the injury, or temporary, when the workers injured were unable to work from the day after the day of the accident, but were later able to perform again the normal duties of work in the job or post occupied at the time of the occupational accident causing the injury within a period of one year from the day of the accident.

A case of non-fatal occupational injury is the case of a worker incurring a non-fatal occupational injury as a result of an occupational accident, which entailed a loss of working time. Incapacity for work is the inability of the victim of an occupational accident, due to an occupational injury, to perform the normal duties of work in the job or post occupied at the time of the occupational accident. The incapacity for work can be permanent, when the persons injured were never able to perform again the normal duties of work in the job or post occupied at the time of the occupational accident causing the injury, or temporary, when the workers injured were unable to work from the day after the day of the accident, but were later able to perform again the normal duties of work in the job or post occupied at the time of the occupational accident causing the injury within a period of one year from the day of the accident. Data are disaggregated by economic activity according to the latest version of the International Standard Industrial Classification of All Economic Activities (ISIC) available for that year. Economic activity refers to the main activity of the establishment in which a person worked during the reference period and does not depend on the specific duties or functions of the person's job, but on the characteristics of the economic unit in which this person works.

The Global Burden of Disease Study 2017 (GBD 2017), coordinated by the Institute for Health Metrics and Evaluation (IHME), estimated the burden of diseases, injuries, and risk factors for 195 countries and territories, and at the subnational level for a subset of countries.

ASGS 2016 LGA based data for Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Sex by Age by Core Activity Need for Assistance across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Core Activity Need for Assistance across 2016, 2011 and 2006. ABS Census Homepage

Census 2016 LGA based data for Country of Birth of Person by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Country of Birth of Person by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Country of Birth of Person by Year of arrival in Australia (ranges), for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Dwelling Internet Connection by Dwelling Structure, for the 2016 Census of Population and Housing

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Dwelling Internet Connection by Dwelling Structure, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Dwelling Structure by Dwelling Type , for the 2016 Census of Population and Housing

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Dwelling Structure by Dwelling Type , for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Dwelling Structure By Number Of Bedrooms in Private Dwelling, for the 2016 Census of Population and Housing

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Dwelling Structure By Number Of Bedrooms in Private Dwelling, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Educational Institution: Attendee Status by Sex, for the 2016 Census of Population and Housing

Australia/State/SA4/SA3/SA2/GCCSA based data for Educational Institution: Attendee Status by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Family Blending by Family records, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Family Blending by Family records, for the 2016 Census of Population and Housing

Census 2016 LGA based data for Highest Year of School Completed by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Australia/State/SA4/SA3/SA2/GCCSA based data for Highest Year of School Completed by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Household Composition By Number Of Persons Usually Resident, for the 2016 Census of Population and Housing

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Household Composition By Number Of Persons Usually Resident, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Indigenous Status by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Indigenous Status by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Industry of employment by age by sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Industry of employment by age by sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Industry of employment by hours worked by sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Industry of employment by hours worked by sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Industry of employment by occupation, for the 2016 Census of Population and Housing

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Industry of employment by occupation, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Labour force status by age by sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Labour force status by age by sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Labour force status by sex of parent by age of dependent children for one parent families, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Labour force status by sex of parent by age of dependent children for one parent families, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Labour force status by sex of parents by age of dependent children for Couple families, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Labour force status by sex of parents by age of dependent children for Couple families, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Language spoken at home by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Language spoken at home by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Method of travel to work by sex, for the 2016 Census of Population and Housing

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Method of travel to work by sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Mortgage Repayments (monthly) by Dwelling Structure, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Non-school qualification: Level of Education by age by sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Non-school Qualification: Level of Education by Industry of employment by sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Non-school Qualification: Level of Education by Industry of employment by sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Non-school Qualification Level of Education by occupation by sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Non-school Qualification Level of Education by occupation by sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Number of Motor Vehicles by Dwelling records, for the 2016 Census of Population and Housing

Census 2016 LGA based data for Total Occupation by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Occupation by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Occupation by Hours worked by sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Occupation by Hours worked by sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Registered Marital Status by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Social Marital Status Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Religious Affiliation by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Religious Affiliation by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 LGA based data for Rent (weekly) by Dwelling Structure, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Rent (weekly) by Dwelling Structure, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Social Marital Status Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Social Marital Status Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Family Income (weekly) by Family Composition, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Family Income (weekly) by Family Composition, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Family Income (weekly) by Labour Force Status by Family Composition , for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Family Income (weekly) by Labour Force Status by Family Composition , for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Household Income (Weekly) by Household Composition, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Total Personal Income (weekly) by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Personal Income (weekly) by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Unpaid Assistance to a Person with a Disability by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Australia/State/SA4/SA3/SA2/GCCSA based data for Unpaid Assistance to a Person with a Disability by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Unpaid Child Care by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Unpaid Child Care by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Unpaid Domestic Work: Number of Hours by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Unpaid Domestic Work: Number of Hours by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Census 2016 LGA based data for Voluntary Work for an Organisation or Group by Age by Sex, for the 2016 Census of Population and Housing ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Voluntary Work for an Organisation or Group across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Dwelling Structure by Dwelling Internet Connection across 2016, 2011 and 2006.

Time Series comparison of Census 2016 LGA based data for Dwelling Structure by Dwelling Type across 2016, 2011 and 2006.

Time Series comparison of Census 2016 LGA based data for Educational Institution: Attendee Status by Sex across 2016, 2011 and 2006.

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Family Blending by Family records across 2016, 2011 and 2006.

Time Series comparison of Census 2016 LGA based data for Total Industry of employment by sex across 2016, 2011 and 2006.

Time Series comparison of Census 2016 LGA based data for Number of Motor Vehicles by Dwelling records across 2016, 2011 and 2006.

Time Series comparison of Census 2016 LGA based data for Total Occupation by sex across 2016, 2011 and 2006.

Time Series comparison of Census 2016 LGA based data for Total Selected Labour Force, Education and Migration Characteristics across 2016, 2011 and 2006.

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Age by Sex across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Registered Marital Status across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Social Marital Status across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Indigenous Status across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Educational Institution: Attendee Status by Sex across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Sex by Age by Highest Year of School Completed across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Highest Year of School Completed across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Core Activity Need for Assistance across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Sex by Age by Voluntary Work for an Organisation or Group across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Voluntary Work for an Organisation or Group across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Sex by Age by Unpaid Domestic Work: Number of Hours across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Unpaid Domestic Work: Number of Hours across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Sex by Age by Unpaid Assistance to a Person with a Disability across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Unpaid Assistance to a Person with a Disability across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Sex by Age by Unpaid Child Care across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Sex by Age by Unpaid Child Care across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Number of Motor Vehicles by Dwelling records across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Household Composition by Number of Persons Usually Resident across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Household Composition by Number of Persons Usually Resident across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Dwelling Structure by Dwelling Type across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Mortgage Repayments (monthly) by Dwelling Structure across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Mortgage Repayments (monthly) by Dwelling Structure across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Rent (weekly) by Dwelling Structure across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Rent (weekly) by Dwelling Structure across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Dwelling Structure by Dwelling Internet Connection across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Dwelling Structure by Number of Bedrooms in Private Dwelling across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Dwelling Structure by Number of Bedrooms in Private Dwelling across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Selected Labour Force, Education and Migration Characteristics across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of Census 2016 LGA based data for Total Non-school qualification: Field of Study by age by sex across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Non-school qualification: Field of Study by age by sex across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Non-school qualification: Field of Study by age by sex across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Labour force status by age by sex across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Industry of employment by sex across 2016, 2011 and 2006. ABS Census Homepage

Time Series comparison of ASGS 2016 Australia/State/GCCSA/SA4/SA3/SA2 based data for Total Occupation by sex across 2016, 2011 and 2006. ABS Census Homepage

Data cited at : https://www.bis.org/statistics/index.htm

Note:  The updates and revisions for the OECD Central Government Debt Database have been suspended. This dataset is no longer updated. For more info, please read http://stats.oecd.org/Index.aspx?DataSetCode=GOV_DEBT   Statistical population The focus of this dataset is to provide comprehensive quantitative information on marketable and non-marketable central government debt instruments in all OECD member countries. The coverage of the data is limited to central government debt issuance and excludes therefore state and local government debt and social security funds.

CGPITRT: Central government personal income tax rates and threshold   This table reports statutory central government personal income tax rates for wage income plus the taxable income thresholds at which these statutory rates apply. The table also reports basic/standard tax allowances, tax credits and surtax rates. The information is applicable to a single person without dependents. The threshold, tax allowance and tax credit amounts are expressed in national currencies Tapered means that the tax relief basic amount is reduced with increasing income Further explanatory notes may be found in the Explanatory Annex This data represents part of the data presented within the Excel file “Personal income tax rates and thresholds for central governments - Table I.1”. The Data for 1981 to 1999 is not included here within as not all the data for these years is either available, or can be verified. The OECD tax database provides comparative information on a range of tax statistics - tax revenues, personal income taxes, non-tax compulsory payments, corporate and capital income taxes and taxes on consumption - that are levied in the 34 OECD member countries.” Tax policy Analysis homepage OECD Tax Database Taxing Wages Dissemination format(s) This data is also presented through the OECD Tax database webpage. OECD Tax Database

Global and regional deaths of children under 5 years of age by cause. Estimates generated by the WHO and Maternal and Child Epidemiology Estimation Group (MCEE) 2018.

Data cited at: Statistics Finland http://www.stat.fi/index_en.html Publication: 030 -- Citizenship by sex, by region and municipality in 1990 to 2017 http://pxnet2.stat.fi/PXWeb/pxweb/en/StatFin/StatFin__vrm__vaerak/statfin_vaerak_pxt_030.px License: http://creativecommons.org/licenses/by/4.0/ Concepts and definitions Description Quality description These statistics apply the regional division of 1 January 2018 to the whole time series. Population statistics from 1750 to 2000 have been digitised into PDF format in the National Library's Doria service. Publications on Population structure and vital statistics in Doria (in Finnish) Publications on Population censuses in Doria (in Finnish) Area For reasons of privacy protection, cells with less than 10 cases of citizenship, country of birth, background country or language by municipality have been marked with two dots. Continent sums have not been hidden in municipality data nor have regional data concerning individual languages or countries. Citizenship If a person has two nationalities and one of them is Finnish, he/she will be included in statistics as a Finnish national. The used classification of continents is the classification of Eurostat, where Cyprus and Turkey belong to Europe. Citizens of non-autonomous states are summed under the mother country. Citizenship Czech Republic Czech Republic + Former Czechoslovakia Sudan Sudan + Former Sudan

Data cited at: End Coal https://endcoal.org/ Topic: Coal Plants by country Publication URL: https://endcoal.org/global-coal-plant-tracker/summary-statistics/ License: https://creativecommons.org/licenses/by-nc/4.0/

The collective bargaining coverage rate conveys the number of employees whose pay and/or conditions of employment are determined by one or more collective agreement(s) as a percentage of the total number of employees. Collective bargaining coverage includes, to the extent possible, workers covered by collective agreements in virtue of their extension. Collective bargaining coverage rates are adjusted for the possibility that some workers do not have the right to bargain collectively over wages (e.g. workers in the public services who have their wages determined by state regulation or other methods involving consultation), unless otherwise stated in the notes. The statistics presented in this table result from an ILO data compilation effort (including an annual questionnaire and numerous special enquiries), with contributions from J. Visser.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Commissions in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Food supply data is some of the most important data in FAOSTAT. In fact, this data is for the basis for estimation of global and national undernourishment assessment, when it is combined with parameters and other data sets. This data has been the foundation of food balance sheets ever since they were first constructed. The data is accessed by both business and governments for economic analysis and policy setting, as well as being used by the academic community.

Data cited at: The World Bank https://datacatalog.worldbank.org/ Topic: Commodity Markets Outlook Publication: http://www.worldbank.org/en/research/commodity-markets License: http://creativecommons.org/licenses/by/4.0/   Report on Commodity Markets Outlook, 2019 April Financial Years-1970/71,1980/1981,2017/2018,2018/2019 have been considered as 1971,1981,2018,2019 respectively.

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Designs constitute means by which creators seek protection for their industrial property. Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Design data can provide a link between innovation and the market. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Designs. Community Design refer to design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trade marks and Designs. A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Designs constitute means by which creators seek protection for their industrial property. Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Design data can provide a link between innovation and the market. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Designs. Community Design refer to design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trade marks and Designs. A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Designs constitute means by which creators seek protection for their industrial property. Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Design data can provide a link between innovation and the market. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Designs. Community Design refer to design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trade marks and Designs. A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Designs constitute means by which creators seek protection for their industrial property. Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Design data can provide a link between innovation and the market. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Designs. Community Design refer to design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trade marks and Designs. A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the "identity" of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

Intellectual property refers broadly to the creations of the human mind. Intellectual property rights protect the interests of creators by giving them property rights over their creations. Trademark and Designs constitute means by which creators seek protection for their industrial property. Trademark and Designs reflect the non-technological innovation in every sector of economic life, including services. In this context, indicators based on Trademark and Design data can provide a link between innovation and the market. Trade marks such as words or figurative marks are an essential part of the “identity” of goods and services. They help deliver brand recognition, in logos for example, and play an important role in marketing and communication. It is possible to register a variety of trademarks including words, other graphical representations, and even sounds. Rights owners have a choice of obtaining protection on a country-by-country basis, or using international systems. A design is the outward appearance of a product or part of it, resulting from the lines, contours, colours, shape, texture, materials and/or its ornamentation. The design or shape of a product can be synonymous with the branding and image of a company and can become an asset with increasing monetary value. This domain provides users with data concerning Community Trademarks and Designs. Community Trademarks and Design refer to trade mark and design protections throughout the European Union, which covers 28 countries. The Office for Harmonization in the Internal Market (OHIM) is the official office of the European Union for the registration of Community Trademarks and Designs. A Community trade mark is an exclusive right that protects distinctive signs, valid across the EU, registered directly with OHIM in Alicante in accordance with the conditions specified in the CTM Regulations (Source: OHIM). A registered Community design (RCD) is an exclusive right that covers the outward appearance of a product or part of it. The fact that the right is registered confers on the design great certainty should infringement occur. An RCD initially has a life of five years from the filing date and can be renewed in blocks of five years up to a maximum of 25 years. Applicants may market a design for up to 12 months before filing for an RCD without destroying its novelty (Source: OHIM).

The OECD Science, Technology and Industry Outlook 2012 presents, in a series of country profiles, the main features, strengths and weaknesses of national STI systems and major recent changes in national STI policy. The statistical dimension of the country profiles has drawn on the work and empirical research conducted by the OECD on the measurement of innovation and the development of internationally comparable STI indicators for policy analysis.   

Eurostat Dataset Id:educ_bo_ou_comp The Bologna declaration was signed in 1999 by 29 European ministers responsible for higher education. Today, 46 signatory countries are engaged in the process towards a European Higher Education Area (EHEA). The Bologna Process is an intergovernmental initiative which also involves the European Commission, the Council of Europe and UNESCO-CEPES, as well as representatives of higher education institutions, students, staff, employers and quality assurance agencies. It aims to create a European Higher Education Area by 2010, and to promote the European system of higher education worldwide. More information on the Bologna process is available on http://ec.europa.eu/education/higher-education/doc1290_en.htm. Many indicators on social dimension and mobility in the Bologna process come from the UOE data collection in the education statistics domain. The completion rate (educ_bo_ou_comp) was computed in the framework of the UOE data collection (jointly carried out by Unesco, OECD and Eurostat), but is usually disseminated by OECD only. The methodology for estimating completion rates varies across countries. They can use three methods: the cross-section method, the true cohort method, or the synthetic cohort method (see section 11.1 below for more details). The year of reference gives the reference year for the number of graduates. The estimation assumes constant student flows at the tertiary level, owing to the need for consistency between the graduate cohort in the reference year and the entrant cohort n years before. This assumption may be an oversimplification. Results are less reliable in systems in which enrolments fluctuate markedly, or students are faced with many different options as regards the length of courses for which they may enrol or in which there are many changes in programmes between the years of admission and graduation respectively. The inclusion of foreign students in the new entrant questionnaire can have an impact on the completion rates indicator. In some countries, the proportion of foreign students represents a large part of tertiary population, and all of them are considered as new entrants in tertiary education (as advised in UOE Guidelines) whereas most of them won't be graduated at this level of education. The consequence is to underestimate the completion rates in those countries with relatively large proportions of foreign students enrolled in tertiary education.

Statistical population: CLIs are calculated for 33 OECD countries (Iceland is not included), 6 non-member economies and 8 zone aggregates. A country CLI comprises a set of component series selected from a wide range of key short-term economic indicators.   CLIs, reference series data (see below) and standardised business and consumer confidence indicators are presented in various forms.   Recommended uses and limitations: The composite leading indicator is a times series, formed by aggregating a variety of component indicators which show a reasonably consistent relationship with a reference series (e.g. industrial production IIP up to March 2012 and since then the reference series is GDP) at turning points. The OECD CLI is designed to provide qualitative information on short-term economic movements, especially at the turning points, rather than quantitative measures. Therefore, the main message of CLI movements over time is the increase or decrease, rather than the amplitude of the changes. The OECD’s headline indicator is the amplitude adjusted CLI. In practice, turning points in the de-trended reference series have been found about 4 to 8 months (on average) after the signals of turning points had been detected in the headline CLI.

THE CONCORDIA PARTNERSHIP Index (the Index) was developed as a tool for public, private, and nonprofit organizations to identify opportunities to form strategic partnerships and pool resources for the implementation of innovative ideas. The Index ranks countries based on their readiness and need to engage in public-private partnerships (P3s). The inclu- sion of the need indicators sets the Index apart from other indices that measure P3 environ- ments. While the success of a P3 depends on a country’s political and market structures, the Index recognizes that for a P3 to be truly impactful it must address a large-scale need.

Contains statistics on live births and fertility for Australia, states and territories, based on calendar year of registration data. Information on characteristics of the mother and child include place of usual residence, sex, Indigenous status, age, marital status and country of birth of parents.

Contains statistics on live births and fertility for Australia, states and territories, based on calendar year of registration data. Information on characteristics of the mother and child include place of usual residence, sex, Indigenous status, age, marital status and country of birth of parents.

The consolidated banking statistics (CBS) measure international banking activity from a nationality perspective, focusing on the country where the banking group's parent is headquartered. While residence-based data such as the locational banking statistics indicate where positions are booked, they do not always identify where underlying decisions are made. This is because banking offices in one country may operate within a business model decided by the group's controlling parent, which may be headquartered in another country. The CBS capture the worldwide claims of banking groups based in reporting countries and exclude intragroup positions, similar to the consolidation approach followed by banking supervisors. The CBS provide several different measures of banking groups' country risk exposures, on either an immediate counterparty or an ultimate risk basis. The most appropriate exposure measure depends on the issue being analysed. The benchmark measure in the CBS is foreign claims, which capture credit to borrowers outside a banking group's home country.   Measure for all Combinations - Amounts Outstanding / Stocks   Note: Under "Reporting country" they have removed "Euro Area".   Data cited at : https://www.bis.org/statistics/index.htm

Below Parameters are common for all combinations : Frequency - Quarterly Measure -Amounts Outstanding / Stocks CBS Bank Type - Domestic Banks CBS Reporting Basis - Immediate Counterparty Basis Balance Sheet Position - Total Claims Type of Instruments - All Instruments Remaining Maturity - All Maturities Currency Type of Booking Location - All Currencies Counterparty Sector - All Sectors Data cited at : https://www.bis.org/statistics/index.htm