Iceland

The indicator measures the share of material recovered and fed back into the economy - thus saving extraction of primary raw materials - in overall material use. The circular material use (CMU) rate is defined as the ratio of the circular use of materials to the overall material use. The overall material use is measured by summing up the aggregate domestic material consumption (DMC) and the circular use of materials. DMC is defined in economy-wide material flow accounts. The circular use of materials is approximated by the amount of waste recycled in domestic recovery plants minus imported waste destined for recovery plus exported waste destined for recovery abroad. Waste recycled in domestic recovery plants comprises the recovery operations R2 to R11 - as defined in the Waste Framework Directive 75/442/EEC. The imports and exports of waste destined for recycling - i.e. the amount of imported and exported waste bound for recovery – are approximated from the European statistics on international trade in goods. A higher CMU rate value means that more secondary materials substitute for primary raw materials thus reducing the environmental impacts of extracting primary material.

Source: State Statistical Office

This dataset provides information on the level of public equipment installed by countries to managed and abate water pollution. It shows the percentage of national population connected to "public" sewerage networks and related treatment facilities, and the percentage of national population connected to "public" wastewater treatment plants, and the degree of treatment. Connected here means actually connected to a wastewater plants through a public sewage network. When analysing these data, it should be kept in mind that the optimal connection rate is not necessarily 100%. It may vary among countries and depends on geographical features and on the spatial distribution of habitats. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

The OECD food waste dataset is a compilation of available data related to food loss and food waste for 32 countries. The period covered may vary across different countries depending on data availability (globally ranging from 1993 to 2013). Several types of sources have been used: international organisations, government and national statistic institutes, OECD delegations, academic studies and private sector or>>/governmental analytical reports. When available, detailed information on sources is provided in the "variable def. and sources" (eg. references to an academic article or a government website).

20.1. Source data

The indicator measures the waste collected by or on behalf of municipal authorities and disposed of through the waste management system. It consists to a large extent of waste generated by households, though similar wastes from sources such as commerce, offices and public institutions may be included.

Total amount of waste generated by households and businesses by economic activity according to NACE Rev. 2 and year.

Waste generated by households (EP-HH) and by waste category (EWC-Stat 4) and hazardousness, latest available year.

The focus of this domain is on the European Neighbourhood Policy (ENP) countries on the southern and eastern shores of the Mediterranean (ENP-South), namely: Algeria (DZ),Egypt (EG),Israel (IL),Jordan (JO),Lebanon (LB),Libya (LY),Morocco (MA),Palestine (PS),Syria (SY) andTunisia (TN). An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. The data and their denomination in no way constitute the expression of an opinion by the European Commission on the legal status of a country or territory or on the delimitation of its borders.

This dataset presents data on waste by economic sector, using the major divisions of the International Standard Industrial Classification (ISIC), revision 4. Data source(s): OECD/Eurostat joint questionnaire on waste. Source for non-OECD countries: UNSD, Country Files from the UNSD/UNEP data collection on environment statistics (available at: https://unstats.un.org/unsd/envstats/country_files).

Total amount of waste generated by households and businesses, by waste category (EWC-Stat 4) and year.

This indicator is defined as all waste generated in a country per inhabitant and year, excluding major mineral wastes, dredging spoils and contaminated soils. This exclusion enhances comparability across countries as mineral waste accounts for high quantities in some countries and economic activities such as mining and construction. The indicator covers hazardous (hz) and non-hazardous (nh) waste from all economic sectors and from households, including waste from waste treatment (secondary waste) but excluding most mineral waste. It is based on data compiled according to the waste categories listed in Annex I to the Waste Statistics Regulation (Regulation 2150/2002/EC).

18.1. Source data

The indicator is defined as all waste generated in a country (in mass unit), excluding major mineral wastes, divided by the domestic material consumption (DMC) of a country. The ratio is expressed in percent (%) as both terms are measured in the same unit, namely tonnes.

The indicator is defined as all waste generated in a country (in mass unit), excluding major mineral wastes, per GDP unit (in euro, chain linked volumes (2010)). The ratio is expressed in kg per thousand EUR.

The indicator, expressed in percentage, is defined as the volume of waste landfilled (directly or indirectly) in a country per year divided by the volume of the waste treated in the same year. The data reflect the treatment of national waste and exclude waste that is imported from non-EU countries. Waste taken into account excludes mineral waste from construction and demolition, other mineral wastes, soils and dredging spoils. This exclusion enhances comparability across countries, as mineral waste accounts for high quantities in some countries due to economic activities such as mining and construction. One exception, however, is that the indicator explicitly includes combustion wastes and solidified, stabilised and vitrified wastes, despite them being completely or partly mineral. The indicator is derived from the two-yearly reporting of the countries according to the Waste Statistics Regulation. It covers landfilling of hazardous and non-hazardous waste from all economic sectors and from households, including waste from waste treatment (secondary waste) but excluding most mineral waste, and waste going into pre-treatment activities (like sorting, drying). Disposal on land is defined by disposal codes D1, D5, D12 and labeled ‘deposit onto or into land’ (summarized as code DSP_L in the database). The indicator is based on data compiled according to Annex I of the Waste Statistics Regulation (Regulation (EC) No 2150/2002) and the statistical waste nomenclature EWC-Stat set out in Annex III.

The focus of this domain is on the European Neighbourhood Policy (ENP) countries on the southern and eastern shores of the Mediterranean (ENP-South), namely: Algeria (DZ),Egypt (EG),Israel (IL),Jordan (JO),Lebanon (LB),Libya (LY),Morocco (MA),Palestine (PS),Syria (SY) andTunisia (TN). An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. The data and their denomination in no way constitute the expression of an opinion by the European Commission on the legal status of a country or territory or on the delimitation of its borders.

20.1. Source data

This dataset presents trends in amounts of municipal waste generated (including household waste), and the treatment and disposal method used. The amount of waste generated in each country is related to the rate of urbanisation, the types and pattern of consumption, household revenue and lifestyles.

It provides a breakdown of government expenditure according to their function. To meet this end, economic flows of expenditure must be aggregated according to the Classification of the Functions of Government (COFOG).

Rate of recovery or incineration at waste incineration plants with energy recovery’ for the purposes of Article 6(1) of Directive 94/62/EC means the total quantity of packaging waste recovered or incinerated at waste incineration plants with energy recovery, divided by the total quantity of generated packaging waste

The indicator is indirectly measured as the ratio of composted/methanised municipal waste (in mass unit) over the total population (in number). The ratio is expressed in kg per capita. The underlying assumption is that, by and large, the only reasonable treatment of biowaste is composting or anaerobic digestion.

The indicator is calculated as recycled waste (RCV_R) divided by total waste treated excluding major mineral wastes (TRT), multiplied by 100. It is expressed in percent (%) as both terms are measured in the same unit, namely tonnes. Recycled waste is waste treated, which was sent to recovery operation other than energy recovery and backfilling (for simplification referred to as recycling). Waste data are adjusted for waste collected in one country and recycled in another country. The amount of recycled waste is adjusted as following: waste treated in domestic plants plus waste sent out of the country for recycling minus waste imported and treated in domestic recycling plants. Waste treated is based in Waste Statistics Regulation and the imports and exports of wastes are based on Foreign Trade Statistics and reported according to the Combined Nomenclature (CN-codes). The indicator covers both hazardous (hz) and non-hazardous (nh) waste from all economic sectors and from households, including waste from waste treatment (secondary waste) but excluding most mineral waste. Major mineral waste is excluded in order to avoid situations where trends in ordinary waste generation can be drowned out by massive fluctuations in the generation of wastes in the mineral extraction and transformation sector. This also permits more meaningful comparison across countries, as mineral waste accounts for very substantial quantities in countries characterized by major mining and construction sectors.

The indicator is calculated by multiplying the 'collection rate' as set out in the WEEE Directive with the 'reuse and recycling rate' set out in the WEEE Directive; where: o The 'collection rate' equals the volumes collected of WEEE in the reference year divided by the average quantity of electrical and electronic equipment (EEE) put on the market in the previous three years (both expressed in mass unit). o The 'reuse and recycling rate' is calculated by dividing the weight of WEEE that enters the recycling/preparing for re-use facility by the weight of all separately collected WEEE (both in mass unit) in accordance with Article 11(2) of the WEEE Directive 2012/19/EU, considering that the total amount of collected WEEE is sent to treatment/recycling facilities. The indicator is expressed in percent (%) as both terms are measured in the same unit.

The indicator measures the share of recycled municipal waste in the total municipal waste generation. Recycling includes material recycling, composting and anaerobic digestion. The ratio is expressed in percent (%) as both terms are measured in the same unit, namely tonnes.

The indicator is defined as the share of recycled packaging waste in all generated packaging waste. Packaging waste covers wasted material that was used for the containment, protection, handling, delivery and presentation of goods, from raw materials to processed goods, from the producer to the user or the consumer, excluding production residues. Packaging waste is broken down into plastic packaging waste and wooden packaging waste. The ratio is expressed in percent (%) as both terms are measured in the same unit, namely tonnes.

'Recycling rate' for the purposes of Article 6(1) of Directive 94/62/EC means the total quantity of recycled packaging waste, divided by the total quantity of generated packaging waste.

Trade in recyclable raw material shows the amounts (in mass unit) and the monetary value (in Euro) of total wastes that are shipped across intra- and extra EU borders. The dataset includes following variables: Imports to EU countries of recyclable raw materials (in order to characterise intra-EU trade);Imports from non-EU countries and exports to non-EU countries of recyclable raw materials (in order to characterise trade of the EU with the rest of the world).Exports to EU countries of recyclable raw materials, (in order to characterise trade among EU countries). Data are disaggregated by EU-Member State and by category of material, following the classification provided by the JRC (see list of CN-codes used). This dataset is taken from International Trade in Goods Statistics (ITGS) published by Eurostat. The data measure both the monetary value and the physical quantity of goods traded between the EU Member States (intra-EU trade) and of goods traded by the EU Member States with non-EU countries (extra-EU trade). ‘European’ means that the statistics are compiled on the basis of the concepts and definitions set out in EU legislation. ‘National’ statistics, i.e. statistics published at national level by the Member States, are compiled on the basis of national rules which may differ from EU rules. Product coverage: The scope of the “recyclable raw material” is defined and approximated in terms of relevant product codes selected from the list of Combined Nomenclature codes used in International Trade in Goods Statistics. They are grouped according to JRC classification which provides a breakdown for the following material classes: PlasticPaper and cardboardPrecious metalIron and steelCopper, aluminium and nickel

The focus of this domain is on the European Neighbourhood Policy (ENP) countries on the southern and eastern shores of the Mediterranean (ENP-South), namely: Algeria (DZ),Egypt (EG),Israel (IL),Jordan (JO),Lebanon (LB),Libya (LY),Morocco (MA),Palestine (PS),Syria (SY) andTunisia (TN). An extensive range of indicators is presented in this domain, including indicators from almost every theme covered by European statistics. Only annual data are published in this domain. The data and their denomination in no way constitute the expression of an opinion by the European Commission on the legal status of a country or territory or on the delimitation of its borders.

The indicator presents the amount of waste excluding major mineral wastes generated in the EU 28, expressed in kg per inhabitant and year. The indicator allows to monitor waste generation over time for the EU as a whole and to compare the development of waste generation across countries. The indicator covers hazardous and non-hazardous waste from all economic sectors and from households, including waste from waste treatment (secondary waste) but excluding major mineral wastes. The indicator is based on data compiled according to Annex I of the Waste Statistics Regulation (Regulation 2150/2002/EC) and according to aggregates of the material-oriented statistical waste nomenclature EWC-Stat in Annex III of the Waste Statistics Regulation (WStatR). Key policy question: Waste prevention: Are we reducing the generation of waste - Basic data: Eurobase, table Generation of waste (env_wasgen) For more detail see item 13. Relevance

Waste generated by households (EP-HH) by year and waste category (EWC-Stat 4).