Organisation for Economic Co-operation and Development

This dataset is used to report the tying status of bilateral ODA commitments. Members have agreed that administrative costs and technical co-operation expenditure should be disregarded in assessing the percentages of tied, partially untied and untied aid. These items have not been included in the data reported in this data set.

There is more to life than the cold numbers of GDP and economic statistics. This dataset contains the 2018 data of the Better Life Index which allows you to compare well-being across countries as well as measuring well-being, based on 11 topics the OECD has identified as essential, in the areas of material living conditions and quality of life. Abstract: Your Better Life Index aims to involve citizens in the debate on measuring the well-being of societies, and to empower them to become more informed and engaged in the policy-making process that shapes all our lives. Each of the 11 topics of the Index is currently based on one to three indicators. Within each topic, the indicators are averaged with equal weights. The indicators have been chosen on the basis of a number of statistical criteria such as relevance (face-validity, depth, policy relevance) and data quality (predictive validity, coverage, timeliness, cross-country comparability etc.) and in consultation with OECD member countries. These indicators are good measures of the concepts of well-being, in particular in the context of a country comparative exercise. Other indicators will gradually be added to each topic.  Notes: Data cannot be compared between different editions of the Better Life Index. For more information on change over time, please contact [email protected].

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The OECD, in cooperation with the EU, has developed a harmonised definition of urban areas which overcomes previous limitations linked to administrative definitions (OECD, 2012). According to this definition an urban area is a functional economic unit characterised by densely inhabited “city core” and “commuting zone” whose labour market is highly integrated with the core. The Metropolitan database provides indicators of 649 OECD metropolitan areas identified in 33 OECD countries and the functional urban areas of Colombia. Comparable values of population, GDP, employment, and other indicators are presented.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) has potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. The underlying PM2.5 concentrations estimates are taken from van Donkelaar et al. (2016). They have been derived using satellite observations and a chemical transport model, calibrated to global ground-based measurements using Geographically Weighted Regression at 0.01° resolution. The underlying population data, Gridded Population of the World, version 4 (GPWv4) are taken from the Socioeconomic Data and Applications Center (SEDAC) at the NASA. The underlying boundary geometries are taken from the Global Administrative Unit Layers (GAUL) developed by the FAO, and the OECD Territorial Classification, when available. The current version of the database presents much more variation with respect to the previous one. The reason is that the underlying concentration estimates previously included smoothed multi-year averages and interpolations; while in the current version annual concentration estimates are used. Establishing trends of pollution exposure should be done with care, especially at smaller output areas, as their inputs (e.g. underlying data and models) can change from year to year. We recommend using a 3-year moving average for visualisation.

The FDI Regulatory Restrictiveness Index (FDI Index) measures statutory restrictions on foreign direct investment across 22 economic sectors. It gauges the restrictiveness of a country’s FDI rules by looking at the four main types of restrictions on FDI: 1) Foreign equity limitations; 2) Discriminatory screening or approval mechanisms; 3) Restrictions on the employment of foreigners as key personnel and 4) Other operational restrictions, e.g. restrictions on branching and on capital repatriation or on land ownership by foreign-owend enterprises. Restrictions are evaluated on a 0 (open) to 1 (closed) scale. The overall restrictiveness index is the average of sectoral scores. The discriminatory nature of measures, i.e. when they apply to foreign investors only, is the central criterion for scoring a measure. State ownership and state monopolies, to the extent they are not discriminatory towards foreigners, are not scored. The FDI Index is not a full measure of a country’s investment climate. A range of other factors come into play, including how FDI rules are implemented. Entry barriers can also arise for other reasons, including state ownership in key sectors. A country’s ability to attract FDI will be affected by others factors such as the size of its market, the extent of its integration with neighbours and even geography among other. Nonetheless, FDI rules can be a critical determinant of a country’s attractiveness to foreign investors.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at:http://www.oecd.org/dataoecd/0/49/38356329.pdf. Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

Bilateral ODA commitments by purpose. Data cover the years 2005 to 2009. Amounts are expressed in USD million. The sectoral distribution of bilateral ODA commitments refers to the economic sector of destination (i.e. the specific area of the recipient's economic or social structure whose development is, or is intended to be fostered by the aid), rather than to the type of goods or services provided. These are aggregates of individual projects notified under the Creditor Reporting System, supplemented by reporting on the sectoral distribution of technical co-operation, and on actual disbursements of food and emergency aid.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

Productivity is a key driver of economic growth and changes in living standards. Labour productivity growth implies a higher level of output for unit of labour input (hours worked or persons employed). This can be achieved if more capital is used in production or through improved overall efficiency with which labour and capital are used together, i.e., higher multifactor productivity growth (MFP). Productivity is also a key driver of international competitiveness, e.g. as measured by Unit Labour Costs (ULC).   The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, some time lag may arise which affects individual series and/or countries for two reasons: first, hours worked data from the OECD Employment Outlook are typically updated less frequently than the OECD Annual National Accounts Database; second, source data for capital services are typically available in annual national accounts later than source data for labour productivity and ULCs.   Note to users: The OECD Productivity Database accounts for the methodological changes in national accounts' statistics, such as the implementation of the System of National Accounts 2008 (2008 SNA) and the implementation of the international industrial classification ISIC Rev.4. These changes had an impact on output, labour and capital measurement. For Chile, China, Colombia, India, Japan, Turkey and the Russian Federation the indicators are in line with the System of National Accounts 1993 (1993 SNA); for all other countries, the indicators presented are based on the 2008 SNA

A System of Health Accounts 2011 provides an updated and systematic description of the financial flows related to the consumption of health care goods and services. As demands for information increase and more countries implement and institutionalise health accounts according to the system, the data produced are expected to be more comparable, more detailed and more policy relevant. It builds on the original OECD Manual, published in 2000 to create a single global framework for producing health expenditure accounts that can help track resource flows from sources to uses. It is the result of a collaborative effort between the OECD, WHO and the European Commission, and sets out in more detail the boundaries, the definitions and the concepts – responding to health care systems around the globe – from the simplest to the more complicated. The accounting framework is organised around a tri-axial system for the recording of health care expenditure, namely classifications of the functions of health care (ICHA-HC), health care provision (ICHA-HP), and financing schemes (ICHA-HF).

This data deals with premiums written by classes of non-life insurance for the business written in the reporting country.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This table contains figures on affiliates under foreign control by investing country in the total manufacturing, total services and total business enterprise sectors.

Rivers Data show water quality of selected rivers. Water quality is measured in terms of annual mean concentrations of dissolved oxygen and BOD; of nitrates, phosphorus and ammonium; and of lead, cadmuim, chromium and copper. The rivers selected are main rivers draining large watersheds in the countries chosen; the measurement locations are at the mouths or downstream frontiers of the rivers. These parameters provide information concerning the state and trends of pollution by organic matter and nutrients, heavy metals and other metals. In reading the data, one should compare trends rather than absolute values, since measurement methods vary by country. Lakes Data show trends in annual mean concentrations of phosphorus and nitrogen in selected lakes. These parameters concern nutrient concentrations and related degrees of eutrophication of lakes and reservoirs. The interpretation of these tables should take into account variations in the methods of sampling (e.g. sampling location and number of measurements at different sampling locations and in different years).

This dataset presents members' total use of the multilateral system i.e. both their multilateral aid ("Core contributions to") and bilateral aid channelled through ("Contributions through") multilateral organisations. These data originate from members' reporting at item-level in the CRS and are published here starting with 2011 data (item-level data for multilateral aid is not complete in CRS for earlier years).

It presents simplified non-financial accounts, from the gross value added to the net lending/net borrowing. In this table, the total economy is broken down in three main institutional sectors: corporations, general government, households and non-profit institutions serving households. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

This OECD inventory maps existing cross-country surveys that provide information on the characteristics of people's jobs. The information included in this inventory covers international surveys conducted since the early 1990s that are based on individuals' self-reported assessment of their current job, for 160 countries over 25 years. Survey questions are grouped into 19 indicators. For each indicator, binary codes (1 and 0) show whether indicators are available or not for the various countries and years. The inventory also provides users with detailed documentation on the questions used in the various surveys for measuring these indicators.

This table contains figures on the activity affiliates located abroad by industry according to the International Standard Industrial Classification (ISIC Revision 4). The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

The Population and Vital Statistics dataset presents components of change in the population during one year and mid-year population data for the 34 OECD member countries. Data are presented in thousands of persons and as rates in per 1000. The components of change in the population during one year are presented as follow: the first statistics refer to the population on January 1st for each year, the natural increase of the population is the difference between the number of births and deaths over the calendar year, the addition of net migration and statistical adjustments to the natural increase gives the total increase of the population over the calendar year. The addition of the total population increase to the population on January 1st gives the population on December 31st. Note: No longer this dataset be collected by OECD. Population and demographic events are available from the United Nation database at "https://esa.un.org/unpd/wpp/Download/Standard/Population/."    

Private transactions are those undertaken by firms and individuals resident in the reporting country.

The Regional database contains annual data from 1995 to the most recent available year (generally 2022 for demographic and labor market data, 2021 for regional accounts, innovation and social statistics). 

The Regional database contains annual data from 1995 to the most recent available year (generally 2018 for demographic and labor market data, 2017 for regional accounts, innovation and social statistics). The data collection is undertaken by the Center for Entrepreneurship, SMEs, Regions and Cities (CFE). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and via downloads from the web-sites of National Statistical Offices and Eurostat

The Regional Database contains annual data from 1995 to the most recent available year. The data collection is undertaken by the Directorate of Public Governance and Territorial Development, within the Regional Development Policy division (GOV/RDP). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and through access to the web-sites of National Statistical Offices and Eurostat. The WPTI is responsible for developing regional (subnational) and urban statistics and providing analysis to support policy evaluations. The Regional Database includes statistics on the regional distribution of resources, regional disparities, and how regions contribute to national growth and the well-being of society. Under this framework, the Regional Database is one of the pillars for providing indicators to the publication OECD Regions at a Glance (link).

The Regional Database contains annual data from 1995 to the most recent available year (generally 2016 for demographic, 2015 for labor market data and 2014 for regional accounts, innovation and social statistics).

The Regional Database contains annual data from 1995 to the most recent available year (generally 2014 for demographic and labour market data, 2013 for regional accounts, innovation and social statistics).   In any analytical study conducted at sub-national levels, the choice of the territorial unit is of prime importance. The territorial grids (TL2 and TL3) used in this database are officially established and relatively stable in all member countries, and are used by many as a framework for implementing regional policies. This classification - which, for European countries, is largely consistent with the Eurostat classification - facilitates greater comparability of regions at the same territorial level. The differences with the Eurostat NUTS classification concern Belgium, Greece and the Netherlands where the NUTS 2 level correspond to the OECD TL3 and Germany where the NUTS1 corresponds to the OECD TL2 and the OECD TL3 corresponds to 97 spatial planning regions (Groups of Kreise). For the United Kingdom the Eurostat NUTS1 corresponds to the OECD TL2. Due to limited data availability, labour market indicators in Canada are presented for a different grid (groups of TL3 regions). Since these breakdowns are not part of the OECD official territorial grids, for the sake of simplicity they are labelled as Non Official Grids (NOG).

The Regional well-being dataset presents eleven dimensions central for well-being at local level and for 395 OECD regions, covering material conditions (income, jobs and housing), quality of life (education, health, environment, safety and access to services) and subjective well-being (social network support and life satisfaction). The set of indicators selected to measure these dimensions is a combination of people's individual attributes and their local conditions, and in most cases, are available over two different years (2000 and 2014). Regions can be easily visualised and compared to other regions through the interactive website [www.oecdregionalwellbeing.org]. The dataset, the website and the publications "Regions at a Glance" and "How’s life in your region?" are outputs designed from the framework for regional and local well-being. The Regional income distribution dataset presents comparable data on sub-national differences in income inequality and poverty for OECD countries. The data by region provide information on income distribution within regions (Gini coefficients and income quintiles), and relative income poverty (with poverty thresholds set in respect of the national population) for 2013. These new data complement international assessments of differences across regions in living conditions by documenting how household income is distributed within regions and how many people are poor relatively to the typical citizen of their country. For analytical purposes, the OECD classifies regions as the first administrative tier of sub-national government, so called Territorial Level 2 or TL2 in the OECD classification. This classification is used by National Statistical Offices to collect information and it represents in many countries the framework for implementing regional policies. Well-being indicators are shown for the 395 TL2 OECD regions, equivalent of the NUTS2 for European countries, with the exception for Estonian where well-being data are presented at a smaller (TL3) level and for the Regional Income dataset, where Greece, Hungary and Poland data are presented at a more aggregated (NUTS1) level.

Data on government sector receipts, and on taxes in particular, are basic inputs to most structural economic descriptions and economic analyses and are increasingly used in international comparisons. This annual database presents a unique set of detailed and internationally comparable tax data in a common format for all OECD countries.

The SIGI is built on 27 innovative variables measuring discriminatory social institutions, which are grouped into 4 dimensions: discrimination in the family, restricted physical integrity, restricted access to productive and financial resources, and restricted civil liberties.Lower values indicate lower levels of discrimination in social institutions: the SIGI ranges from 0% for no discrimination to 100% for very high discrimination.

Survey on Monitoring the Paris Declaration. The dataset contains data as reported by donors and national co-ordinators in participating partner countries. The dataset includes all quantitative data collected through the 2006, 2008 and 2011 Surveys.

Total Official Flows: the sum of Official Development Assistance (ODA) and Other Official Flows (OOF) represents the total (gross or net) disbursements by the official sector at large to the recipient country shown.

World Indicators of Skills for Employment (WISE) provide a comprehensive system of information relating to skills development. WISE presents countries with data upon which they can design skills policies and programs and monitor their impact on key outcomes, including responsiveness to current and emerging patterns of labour market demand, employability, productivity, health status, gender equity and lifelong learning.The database covers the period from 1990 to the present and consists of five inter-related domains of indicators:Contextual factors drive both the supply of and demand for skills.Skill acquisition covers investments in skills, the stock of human capital and its distribution.Skill requirements measure the demand for skills arising in the labour market.The degree of matching captures how well skills obtained through education and training correspond to the skills required in the labour market.Outcomes reflect the impact of skills on economic performance and employment and social outcomes.