Organisation for Economic Co-operation and Development

AEO (African Economic Outlook) Country Notes Tables, 2015

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilisers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

The gross nutrient balances (N and P) are calculated as the difference between the total quantity of nutrient inputs entering an agricultural system (mainly fertilizers, livestock manure), and the quantity of nutrient outputs leaving the system (mainly uptake of nutrients by crops and grassland). Gross nutrient balances are expressed in tonnes of nutrient surplus (when positive) or deficit (when negative). This calculation can be used as a proxy to reveal the status of environmental pressures, such as declining soil fertility in the case of a nutrient deficit, or for a nutrient surplus the risk of polluting soil, water and air. The nutrient balance indicator is also expressed in terms of kilogrammes of nutrient surplus per hectare of agricultural land to facilitate the comparison of the relative intensity of nutrients in agricultural systems between countries.

commitment is a firm written obligation by a government or official agency, backed by the appropriation or availability of the necessary funds, to provide resources of a specified amount under specified financial terms and conditions and for specified purposes for the benefit of a recipient country or a multilateral agency. Members unable to comply with this definition should explain the definition that they use. -- Commitments are considered to be made at the date a loan or grant agreement is signed or the obligation is otherwise made known to the recipient (e.g. in the case of budgetary allocations to overseas territories, the final vote of the budget should be taken as the date of commitment). For certain special expenditures, e.g. emergency aid, the date of disbursement may be taken as the date of commitment. -- Bilateral commitments comprise new commitments and additions to earlier commitments, excluding any commitments cancelled during the same year. Cancellations and reductions in the year reported on of commitments made in earlier years are reported in the CRS, but not in the DAC questionnaire. -- In contrast to bilateral commitments, commitments of capital subscriptions, grants and loans to multilateral agencies should show the sum of amounts which are expected to be disbursed before the end of the next year and amounts disbursed in the year reported on but not previously reported as a commitment. For capital subscriptions in the form of notes payable at sight, enter the expected amount of deposits of such notes as the amount committed.

Destination of Official Development Assistance Disbursements. Geographical breakdown by donor, recipient and for some types of aid (e.g. grant, loan, technical co-operation) on a disbursement basis (i.e. actual expenditures). The data cover flows from bilateral and multilateral donors which focus on flows from DAC member countries and the EU Institutions.

This dataset contains commitment data (since 2002) and disbursement data (since 2009) on aid in support of gender equality from the CRS database. In their reporting to the Development Assistance Committee (DAC) Creditor Reporting System (CRS), donors are requested to indicate for each activity whether or not it targets gender equality as one of its policy objectives. To qualify as “gender equality focussed,” an activity must explicitly promote gender equality and women’s empowerment. An activity can either target gender equality as its “principal objective” or as a “significant objective”. A “principal” score (2) is assigned if gender equality was an explicit objective of the activity and fundamental to its design - i.e. the activity would not have been undertaken without this objective. A “significant” score (1) is assigned if gender equality was an important, but secondary, objective of the activity - i.e. it was not the principal reason for undertaking the activity. A “not targeted” score (0) is assigned if, after being screened against the gender equality policy marker, an activity is not found to target gender equality. Activities assigned a “principal objective” score should not be considered better than activities assigned a “significant objective” score, as donors that mainstream gender equality - and thus integrate it into their projects across a range of sectors - are more likely to allocate the marker score “significant” to their aid activities. The gender equality marker allows an approximate quantification of aid flows that target gender equality as a policy objective. In marker data presentations the figures for principal and significant objectives should be shown separately and the sum referred to as the “estimate” or “upper bound” of gender equality-focussed aid. An activity can have more than one principal or significant objective. Therefore, total amounts targeting the different objectives should not be added-up to avoid double-counting. Policy markers seek information on the donor’s policy objectives which can be best assessed at the design stage of projects. This is why policy markers are applied to commitments. Policy marker data on a disbursement basis can also be compiled, but it is important to note that this does not mean the policy objectives of projects under implementation would have been re-assessed. Rather, the disbursements are linked to the qualitative information on the original commitment through project identifiers. Consequently, a project marked as gender equality focussed at the commitment stage will be flagged as gender equality focussed throughout its lifetime, unless the qualitative information was changed. Activity-level gender equality marker data that underlie the aggregate figures presented in this dataset are available for consultation and download: see “Export”, “Related files”.

This database includes annual, quarterly and monthly information on carbon dioxide (CO2) emissions related to commercial passenger, freight, and general aviation flights, on both a territory and a residence basis, for 186 countries. These CO2 emissions are estimated by the OECD, based on a consistent methodology across countries. The main source used for the estimation of these CO2 emissions is a database compiled by the International Civil Aviation Organisation (ICAO) with all commercial passenger and freight flights around the world.

The balance of payments is a statistical statement that provides a systematic summary of economic transactions of an economy with the rest of the world, for a specific time period. The transactions are for the most part between residents and non-residents of the economy. A transaction is defined as an economic flow that reflects the creation, transformation, exchange, transfer, or extinction of economic value and involves changes in ownership, of goods or assets, the provision of services, labour or capital.  This dataset presents countries compiling balance of payments statistics in accordance with the 6th edition of the Balance of Payments and International Investment Position Manual published by the IMF (BPM6). Transactions include: the goods and services accounts, the primary income account (income account in BPM5), the secondary income account (transfers in BPM5), the capital account, and the financial account. Changes in BPM6 compared to BPM5 are often a consequence of a stricter application of the change of ownership principle in particular in the goods and services accounts. They relate to transactions on goods and services (merchanting, goods for processing, Insurance), income (investment income), and financial operations (direct investment) .

Since the collection of 2009 data, the scope of the OECD Global Insurance Statistics questionnaire has been expanded. These changes led to the collection of key balance sheet and income statement items for direct insurance and reinsurance sectors, such as: gross claims paid, outstanding claims provision (changes), gross operating expenses, commissions, total assets, gross technical provisions (of which: unit-linked), shareholder equity, net income.

STAN Bilateral Trade Database by Industry and End-use category (BTDIxE) provides values of imports and exports (as well as re-imports and re-exports) of goods broken down by industrial sectors and by end-use categories. BTDIxE was designed to extend the old BTD database which provided bilateral trade in goods by industry only.  BTDIxE allows, for example, insights into the patterns of trade in intermediate goods between countries to track global production networks and supply chains, and it helps to address policy issues such as trade in value added and trade in tasks.  The database presents estimates of bilateral flows of goods from 1990 to the latest available year, i.e. 2018; the latest year shown is subject to the availability of underlying product-based annual trade statistics.  Reporters are the OECD member countries and a large number of non-OECD economies, including the BRIICS: Brazil, the Russian Federation, India, Indonesia, People's Republic of China and South Africa; other selected G20 and Asian economies; and major African and Latin American nations.  It should be noted that starting from mid-2012, the OECD and the United Nations agreed to centralise the data collection and processing procedures within UNSD Comtrade.  The list of partners covers the OECD countries, more than a hundred of non-member economies as well as the partners "World", "Rest of the World" and "Unspecified". The partner "Total foreign trade" corresponds to the flows with partner "World" excluding intra-country flows. Trade flows are divided into economic activities based on the Revision 4 of ISIC and nine end-use categories including capital goods, intermediate goods and household consumption.

The business tendency survey indicators cover a standard set of indicators for four economic sectors: manufacturing, construction, retail trade and other services. This includes an indicator of overall business conditions or business confidence in each sector. The consumer opinion survey indicators cover a restricted set of indicators on consumer confidence, expected economic situation and price expectations.   Business and consumer opinion (tendency) surveys provide qualitative information that has proved useful for monitoring the current economic situation. Typically they are based on a sample of enterprises or households and respondents are asked about their assessments of the current situation and expectations for the immediate future. For enterprise surveys this concerns topics such as production, orders, stocks etc. and in the case of consumer surveys their intentions concerning major purposes, economic situation now compared with the recent past and expectations for the immediate future. Many survey series provide advance warning of turning points in aggregate economic activity as measured by GDP or industrial production. Such series are known as leading indicators in cyclical analysis. These types of survey series are widely used as component series in composite leading indicators.   The main characteristic of these types of surveys is that instead of asking for exact figures, they usually ask for the direction of change e.g. a question on tendency by reference to a “normal” state, e.g. of production level. Possible answers are generally of the three point scale type e.g. up/same/down or above normal/normal/below normal for enterprise surveys and of the five point scale type e.g. increase sharply/increase slightly/remain the same/fall slightly/fall sharply for consumer surveys. In presenting the results as a time series, only the balance is shown. That is “same” or “normal” answers are ignored and the balance is obtained by taking the difference between percentages of respondents giving favourable and unfavourable answers.   Virtually all business tendency and consumer opinion survey data are presented as time series of balances in this dataset, either in raw or seasonally adjusted form. Very few series are presented as indices, and where these exist they have generally been converted from underlying balances by countries before submitting the data to the OECD.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Business written in the reporting country on a gross and net premium basis. It contains a breakdown between domestic companies, foreign-controlled companies and branches and agencies or foreign companies.

OECD Indicators on Carbon dioxide (CO2) emissions embodied in international trade (TeCO2) are derived by combining the 2021 editions of OECD Inter-Country Input-Output (ICIO) Database and of International Energy Agency (IEA) statistics on CO2 emissions from fuel combustion. In this release of TeCO2, emissions from fuels used for international aviation and maritime transport (i.e. aviation and marine bunkers) are also considered.Production-based CO2 emissions are estimated by allocating the CO2 emissions to the 45 target industries in OECD ICIO and, to household final consumption of fuels, by both residents and non-residents.Demand-based CO2 emissions are calculated by multiplying the intensities of the production-based emissions (c) with the global Leontief inverse (I-A)(-1) and global final demand matrix (Y) from OECD ICIO, taking the column sums of the resulting matrix and adding residential and private road emissions (FNLC), i.e. direct emissions from final demand: colsum [ diag(c) (I-A)(-1) Y ] + FNLC.For more information, see TeCO2 web page: http://oe.cd/io-co2.

Institutional coverage As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Commissions in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Statistical population: CLIs are calculated for 33 OECD countries (Iceland is not included), 6 non-member economies and 8 zone aggregates. A country CLI comprises a set of component series selected from a wide range of key short-term economic indicators.   CLIs, reference series data (see below) and standardised business and consumer confidence indicators are presented in various forms.   Recommended uses and limitations: The composite leading indicator is a times series, formed by aggregating a variety of component indicators which show a reasonably consistent relationship with a reference series (e.g. industrial production IIP up to March 2012 and since then the reference series is GDP) at turning points. The OECD CLI is designed to provide qualitative information on short-term economic movements, especially at the turning points, rather than quantitative measures. Therefore, the main message of CLI movements over time is the increase or decrease, rather than the amplitude of the changes. The OECD’s headline indicator is the amplitude adjusted CLI. In practice, turning points in the de-trended reference series have been found about 4 to 8 months (on average) after the signals of turning points had been detected in the headline CLI.

This dataset provides information on the level of public equipment installed by countries to managed and abate water pollution. It shows the percentage of national population connected to "public" sewerage networks and related treatment facilities, and the percentage of national population connected to "public" wastewater treatment plants, and the degree of treatment. Connected here means actually connected to a wastewater plants through a public sewage network. When analysing these data, it should be kept in mind that the optimal connection rate is not necessarily 100%. It may vary among countries and depends on geographical features and on the spatial distribution of habitats. The interpretation of those data should take into account some variations in countries' definitions, as reflected in metadata. Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)

The 'Consumer Price Indices (CPIs)' contains all data that was previously contained in three different datasets: 'Consumer Prices', 'National Consumer Price Indices (CPIs) by COICOP divisions' and 'Harmonised Indices of Consumer Prices (HICPs) by COICOP divisions'. The 'Consumer Price Indices (CPIs)' dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 36 OECD member countries and for some non-member countries. The ‘Consumer Price Indices (CPIs)' dataset contains statistics on Consumer Price Indices including national CPIs, Harmonised Indices of Consumer Prices (HICPs) and their associated weights and contributions to national annual inflation. The data series presented have been chosen as the most relevant prices statistics for which comparable data across countries is available. In all cases, a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis. Data are available monthly for all the countries except for Australia and New Zealand (quarterly data).

Note: CPA data for 2018 and 2019 are projections from the 2016 Survey on Forward Spending Plans. Country Programmable Aid (CPA), outlined in our Development Brief  and also known as “core” aid, is the portion of aid donors programme for individual countries, and over which partner countries could have a significant say. CPA is much closer than ODA to capturing the flows of aid that goes to the partner country, and has been proven in several studies to be a good proxy of aid recorded at country level. CPA was developed in 2007 in close collaboration with DAC members. It is derived on the basis of DAC statistics and was retroactively calculated from 2000 onwards

The country statistical profiles provide a broad selection of indicators, illustrating the demographic, economic, environmental and social developments, for all OECD members. The dataset also covers the five key partner economies with which the OECD has developed an enhanced engagement program with (Brazil, China, India, Indonesia and South Africa) ,accession countries (Colombia, Costa Rica and Lithuania) , Peru and the Russian Federation. The user can easily compare indicators across all countries. Total fertility rates - Unit of measure used: Number of children born to women aged 15 to 49

The objective of the CRS Aid Activity database is to provide a set of readily available basic data that enables analysis on where aid goes, what purposes it serves and what policies it aims to implement, on a comparable basis for all DAC members. Data are collected on individual projects and programmes. Focus is on financial data but some descriptive information is also made available.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business datawhere composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Click to collapse Item coverage Outstanding investment by direct insurance companies, classified by investment category, by the companies' nationality and by its destination (domestic or foreign). As of 2009, investment data exclude assets linked to unit-linked products sold to policyholders.

Graduates/new entrants in each educational field as a percentage of the sum of graduates/new entrants in all fields.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

There has been a growing interest in monitoring patterns of trade in services around the world, which is partly associated with ongoing trade negotiations and partly due to the increasing importance of services in OECD economies. It has been developed to supplement other OECD publications on trade in services to address the data needs of trade analysts. It is also an important part of OECD's programme to facilitate the implementation of the recommendations of the revised Manual on Statistics of International Trade in Services 2010.Other commentsThe Task Force on Statistics of International Trade in Services maintains a matrix summarising the status of the trade in services data collection performed by International Organisations. The table displays links to the databases as well as update timetables, availability of metadata, availability of bilateral data, and other important characteristics.

The OECD Economic Outlook analyses the major economic trends over the coming 2 years. It provides in-depth coverage of the main economic issues and the policy measures required to foster growth in each member country. Forthcoming developments in major non-OECD economies are also evaluated in detail. Each edition of the Outlook provides a unique resource to keep abreast of world economic developments. The OECD Economic Outlook database is a comprehensive and consistent macroeconomic database of the OECD economies, covering expenditures, foreign trade, output, labour markets, interest and exchange rates, balance of payments and government debt. For the non-OECD regions, foreign trade and current account series are available. Variables are defined in such a way that they are as homogenous as possible for the countries covered. Breaks in underlying series are corrected as far as possible. Sources for the historical data are publications of national statistical agencies and OECD data bases such as Quarterly National Accounts, Annual National Accounts, Labour Force Statistics and Main Economic Indicators. The cut-off date for information used in the compilation of the projections was June 1, 2023. The aggregation of world trade takes into account the projections made for the main non-OECD economies. Thus, besides OECD and the OECD euro area, the following regions are available: Dynamic Asian Economies (Chinese Taipei, Hong Kong, Malaysia, the Philippines, Singapore, Thailand, Vietnam); Oil Producers (Algeria, Angola, Azerbaijan Bahrain, Brunei, Chad, Rep. of Congo, Ecuador, Equatorial Guinea, Gabon, Iran, Iraq, Kazakhstan, Kuwait, Libya, Nigeria, Oman, Qatar, Saudi Arabia, Sudan, Timor-Leste, Trinidad and Tobago, Turkmenistan, United Arab Emirates, Yemen, Venezuela); with the remaining countries in a residual 'Rest of the World' group.

The nature of expenditure distinguishes between current and capital expenditure. The resource category refers to service provider (public institutions, government-dependent private institutions, and independent private institutions, i.e. both educational and other institutions). These expenditure figures are intended to represent the total cost of services provided by each type of institution, without regard to sources of funds (whether they are public or private).

These tables are a complement to the report Agricultural Policy Monitoring and Evaluation 2012 : OECD COUNTRIES. They comprise the summary of agricultural support estimates for OECD countries.

Enrolment rate per age is the percentage of students enrolled in each type of institution over the total of students

This indicator examines the share of students by gender, programme orientation, mode of study and type of institution over the total number of students.

Number of students enrolled in different education programmes by country of origin and sex.

In view of the strong demand for cross-national indicators on the situation of families and children, the OECD Family Database was developed to provide cross-national indicators on family outcomes and family policies across the OECD countries, its enhanced engagement partners and EU member states. The database brings together information from various national and international databases, both from within the OECD and from external organisations. The database classifies indicators into four main dimensions: (i) structure of families, (ii) labour market position of families, (iii) public policies for families and children and (iv) child outcomes. Detailed information on the definitions, sources and methods used in the construction of the database can be found on the OECD Family Database webpage.

FDI data are based on statistics provided by 35 OECD member countries and by Lithuania. BMD4: OECD Benchmark Definition of Foreign Direct Investment - 4th Edition

FDI statistics cover all entities in an FDI relationship. An FDI relationship is established when an investor in one country acquires 10% or more of the voting power in a business enterprise in another country. The investor is also called a direct investor or a parent and the business enterprise is called a direct investment enterprise or an affiliate. The 10 percent criteria is used to establish that the direct investor has a significant degree of influence over the operations of the direct investment enterprise. The FDI population includes affiliates that are directly and indirectly owned by the parent. In direct ownership, the parent owns the 10% or more voting power itself. In indirect ownership, the parent controls an affiliate that in turn owns 10 percent or more of the voting power in another enterprise. The FDI population also includes enterprises that are not in a direct investment relationship themselves but have a direct investor in common. Called fellow enterprises, they are included because, even though there is no direct investment relationship between the two, any transactions between them likely resulted from the influence that their common direct investor has on both of their operations.

This dataset FDI positions main aggregates, BMD4 is updated every quarter and includes annual aggregate Foreign Direct Investment (FDI) positions for OECD member countries and for non-OECD G20 countries (Argentina, Brazil, China, India, Indonesia, Saudi Arabia and South Africa), which are included in International Investment Position (IIP) accounts. FDI positions record the total level of direct investment at a given point in time, usually the end of a quarter or of a year.

The financial indicators in this dataset are derived from OECD countries’ financial accounts (transactions): they give a picture of the short-term behavior of institutional sectors. They comprise for instance: Net financial transactions of the general government, as a percentage of Gross Domestic Product (GDP), which corresponds to the general government deficit; Transactions in financial assets of Households and NPISHs, as a percentage of Households Gross Disposable Income (GDI); Transactions in liabilities of Households and NPISHs, as a percentage of GDI.

The financial indicators in this dataset are constructed from OECD countries’ financial balance sheets (stocks): these ratios are considered as relevant to analyse the position and performance of the various institutional sectors. They comprise for instance: Financial net worth of Households and NPISHs, as a percentage of GDI; Non-financial corporations debt to equity ratio; Private sector debt; Leverage of the banking sector; General government debt, as a percentage of GDP.

The dataset Fisheries International collaboration in technology development (bilateral) provides the number of co-inventions (simple patent families) developed jointly by at least two inventors. This indicator is disaggregated by: Country - country of residence of the inventor(s), integral counted; in cases when inventors from more than two countries collaborate, this is translated into distinct bilateral relationships between country pairs. For example, if inventors from 3 countries collaborate (e.g. USA, DEU, JPN) then a unit count is assigned to 6 country pairs (USA-DEU, USA-JPN, DEU-JPN, DEU-USA, JPN-USA, JPN-DEU); in this case a country generally coordinate the project and the others are partners. Partner – country of residence of the inventor(s) who collaborate to the patent. Technology domain – the three main areas of innovation in fisheries and aquaculture, related to technology development. In detail: 1. Harvesting technology such as more effective ways to find or harvest fish and which are typically associated with improvements in catch per unit of effort (e.g. type/size of vessels and their methods of propulsion, search technologies, method of catching or harvesting fish and bringing them on board); 2.Aquaculture technology such as methods to more effectively grow fish in captivity (innovation in feeds, improving the health of aquaculture animals, etc.); 3. New products and markets such as the development of new fish products and markets (food technologies/processing such as the development of surimi as a crabmeat substitute) and the improvement of market access (secure or enlarge markets for fish products) that provides important incentives for green growth (e.g. eco-certification with fishers adopting by-catch saving technologies or modifying fishing practices and/or territorial user rights in fisheries).

The OECD FISH Unit, in collaboration with the Environment Directorate and the Directorate for Science, Technology and Innovation, has developed patent-based innovation indicators that are suitable for tracking developments in fisheries-related technologies. The search strategy for fisheries and aquaculture related technologies adopts a mixed solution with a definition of the technical field of interest in fisheries and aquaculture innovation complemented by keywords, e.g. by looking for keywords in the International Patent Classification (IPC) codes and checking manually the relevance of the results in the text of patents (in the title, the abstract, etc). Technology domains are detailed in the ANNEX attached below. The indicators allow the assessment of countries' and firms' innovative performance as well as the design of governments' fisheries, aquaculture and innovation policies.

FDI statistics cover all entities in an FDI relationship. An FDI relationship is established when an investor in one country acquires 10% or more of the voting power in a business enterprise in another country. The investor is also called a direct investor or a parent and the business enterprise is called a direct investment enterprise or an affiliate. The 10 percent criteria is used to establish that the direct investor has a significant degree of influence over the operations of the direct investment enterprise.   The FDI population includes affiliates that are directly and indirectly owned by the parent. In direct ownership, the parent owns the 10% or more voting power itself. In indirect ownership, the parent controls an affiliate that in turn owns 10 percent or more of the voting power in another enterprise.   The FDI population also includes enterprises that are not in a direct investment relationship themselves but have a direct investor in common. Called fellow enterprises, they are included because, even though there is no direct investment relationship between the two, any transactions between them likely resulted from the influence that their common direct investor has on both of their operations.

Key statistical concept Although there are clear definitions for all the terms used in this survey, countries might have different methodologies to calculate tonne-kilometer and passenger-kilometers. Methods could be based on traffic or mobility surveys, use very different sampling methods and estimating techniques which could affect the comparability of their statistics. Also, if the definition on road fatalities is very clear and well applied by most countries, this is not the case for road injuries. Indeed, not only countries might have different definitions but the important underreporting of road injuries in most countries can distort analysis based on these data.

Freshwater abstractions:   This dataset shows water abstractions by source (surface and ground water) and by major uses. Water abstractions refer to water taken from ground or surface water sources and conveyed to the place of use. If the water is returned to a surface water source, abstraction of the same water by the downstream user is counted again in compiling total abstractions.   When interpreting those data, it should be borne in mind that the definitions and estimation methods employed by member countries may vary considerably.   Data source(s): Joint OECD/Eurostat questionnaire on Inland Waters. Data for non-OECD countries is sourced from UNSD (https://unstats.un.org/unsd/envstats/country_files)  

Date is taken as per country metadata, and which is not having any metadata date is considered as 2023

This dataset contains incidences and gender composition of part-time employment with standardised age groups (15-24, 25-54, 55-64, 65+, total). Part-time employment is based on national definitions.  The definition of part-time work varies considerably across OECD countries Essentially three main approaches can be distinguished: i) a classification based on the worker’s perception of his/her employment situation; ii) a cut-off (generally 30 or 35 hours per week) based on usual working hours, with persons usually working fewer hours being considered part-timers; iii) a comparable cut-off based on actual hours worked during the reference week. A criterion based on actual hours will generally yield a part-time rate higher than one based on usual hours, particularly if there are temporary reductions in working time as a result of holidays, illness, short-timing, etc. On the other hand, it is not entirely clear whether a classification based on the worker’s perception will necessarily yield estimates of part-time work that are higher or lower than one based on a fixed cut-off. In one country (France) which changed from 1981 to 1982 from a definition based on an actual hours cut-off (30 hours) to one based on the respondent’s perception, the latter criterion appeared to produce slightly higher estimates.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at:http://www.oecd.org/dataoecd/0/49/38356329.pdf. Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

Data include pension funds per the OECD classification by type of pension plans and by type of pension funds. All types of plans are included (occupational and personal, mandatory and voluntary). The OECD classification considers both funded and book reserved pension plans that are workplace-based (occupational pension plans) or accessed directly in retail markets (personal pension plans). Both mandatory and voluntary arrangements are included. The data include plans where benefits are paid by a private sector entity (classified as private pension plans by the OECD) as well as those paid by a funded public sector entity. A full description of the OECD classification can be found at: http://www.oecd.org/dataoecd/0/49/38356329.pdf.  Pension funds include also some personal pension arrangements like the Individual Retirement Accounts (IRAs) in the United States as well as funds for government workers. The coverage of the statistics follows the regulatory and supervisory framework. All authorised pension funds are therefore normally covered by the Global Pension Statistics exercise. Assets pertaining to reserve funds in social security systems are excluded.

This dataset contains statistics on Consumer Price Indices - all items, for G20 countries and for the G20 as a whole.  The G20 area consists of the following economies: Argentina, Australia, Brazil, Canada, China, France, Germany, India, Indonesia, Italy, Japan, Korea, Mexico, the Russian Federation, Saudi Arabia, South Africa, Türkiye, the United Kingdom, the United States, the African Union and the European Union. 

The GID-DB is a database providing researchers and policymakers with key data on gender-based discrimination in social institutions. This data helps analyse women’s empowerment and understand gender gaps in other key areas of development.Covering 180 countries and territories, the GID-DB contains comprehensive information on legal, cultural and traditional practices that discriminate against women and girls.

This part contains general information on number of insurance companies and employees within the sector.

This table provides information on the main relevant indicators. The data have mainly been supplied by the World Bank, and cover, where available: -Current Gross National Income (GNI) in US $ millions; -GNI per capita (US $); -Population; -Energy use as kilogram of oil per capita; -Average Life Expectancy of Adults; and -Adult Literacy Rate as a percentage of the country population. Data for Sudan include South Sudan, with the exception of total population, which is reported separately.

Bilateral ODA commitments by purpose. Data cover the years 2005 to 2009. Amounts are expressed in USD million. The sectoral distribution of bilateral ODA commitments refers to the economic sector of destination (i.e. the specific area of the recipient's economic or social structure whose development is, or is intended to be fostered by the aid), rather than to the type of goods or services provided. These are aggregates of individual projects notified under the Creditor Reporting System, supplemented by reporting on the sectoral distribution of technical co-operation, and on actual disbursements of food and emergency aid.

Graduation/entry rates represent an estimated percentage of an age group expected to graduate/enter a certain level of education at least once in their lifetime.

The OECD Green Growth database contains selected indicators for monitoring progress towards green growth to support policy making and inform the public at large. The database synthesises data and indicators across a wide range of domains including a range of OECD databases as well as external data sources. The database covers OECD member and accession countries, key partners (including Brazil, China, India, Indonesia and South Africa) and other selected non-OECD countries.

This dataset presents trends in man-made emissions of major greenhouse gases and emissions by gas.   Data refer to total emissions of CO2 (emissions from energy use and industrial processes, e.g. cement production), CH4 (methane emissions from solid waste, livestock, mining of hard coal and lignite, rice paddies, agriculture and leaks from natural gas pipelines), nitrous oxide (N2O), hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), sulphur hexafluoride (SF6) and nitrogen trifluoride (NF3). Data exclude indirect CO2.   Intensities (per unit of GDP and per capita) as well as index are calculated on gross direct emissions excluding emissions or removals from land-use, land-use change and forestry (LULUCF).   The GDP used to calculate intensities is expressed in USD at 2010 prices and PPPs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Gross claims payments in the reporting country, containing a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. This part contains gross operating expenses in the reporting country, with a breakdown between domestic companies, foreign-controlled companies and branches and agencies of foreign companies.

Productivity is a key driver of economic growth and changes in living standards. Labour productivity growth implies a higher level of output for unit of labour input (hours worked or persons employed). This can be achieved if more capital is used in production or through improved overall efficiency with which labour and capital are used together, i.e., higher multifactor productivity growth (MFP). Productivity is also a key driver of international competitiveness, e.g. as measured by Unit Labour Costs (ULC).   The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, some time lag may arise which affects individual series and/or countries for two reasons: first, hours worked data from the OECD Employment Outlook are typically updated less frequently than the OECD Annual National Accounts Database; second, source data for capital services are typically available in annual national accounts later than source data for labour productivity and ULCs.   Note to users: The OECD Productivity Database accounts for the methodological changes in national accounts' statistics, such as the implementation of the System of National Accounts 2008 (2008 SNA) and the implementation of the international industrial classification ISIC Rev.4. These changes had an impact on output, labour and capital measurement. For Chile, China, Colombia, India, Japan, Turkey and the Russian Federation the indicators are in line with the System of National Accounts 1993 (1993 SNA); for all other countries, the indicators presented are based on the 2008 SNA

Cancer follow up has been given for the range of 5 years. The highest range has been considered as for this period, for example 1995-2000 is considered as 2000.

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.B1:B4

OECD Health Data 2017 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

A System of Health Accounts 2011 provides an updated and systematic description of the financial flows related to the consumption of health care goods and services. As demands for information increase and more countries implement and institutionalise health accounts according to the system, the data produced are expected to be more comparable, more detailed and more policy relevant. It builds on the original OECD Manual, published in 2000 to create a single global framework for producing health expenditure accounts that can help track resource flows from sources to uses. It is the result of a collaborative effort between the OECD, WHO and the European Commission, and sets out in more detail the boundaries, the definitions and the concepts – responding to health care systems around the globe – from the simplest to the more complicated. The accounting framework is organised around a tri-axial system for the recording of health care expenditure, namely classifications of the functions of health care (ICHA-HC), health care provision (ICHA-HP), and financing schemes (ICHA-HF).

OECD Health Data 2016 offers the most comprehensive source of comparable statistics on health and health systems across OECD countries. It is an essential tool for health researchers and policy advisors in governments, the private sector and the academic community, to carry out comparative analyses and draw lessons from international comparisons of diverse health care systems.

Tourism can be regarded as a social, cultural and economic phenomenon related to the movement of people outside their usual place of residence.

Incidence of employment by usual weekly hours worked: This table contains data on the cross-country distribution of employment by hour bands for declared hour bands, broken down by professional status - employees, total employment - sex and detailed age groups. In order to facilitate analysis and comparisons over time, historical data for OECD members have been provided over as long a period as possible, often even before a country became a member of the Organisation. Information on the membership dates of all OECD countries can be found at OECD Ratification Dates

http://www.oecd.org/els/soc/IDD-Metadata.pdf

These data are part of a larger database, hosted on a different website, which includes both quantitative and qualitative data, as well as graphs.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Breakdown of net premiums written in the reporting country in terms of domestic risks and foreign risks, thus providing an indicator of direct cross-border operations of insurance business.

As a consequence of the implementation of the new OECD Global Insurance Statistics' framework, there is a break in series between 2008 and 2009 regarding life and non-life business data where composite insurance undertakings exist. Up until 2008, the insurance business is broken down between life and non-life business. As of 2009, the insurance business is broken down between the business of pure life, pure non-life and composite undertakings and composite undertakings' business is further broken down between life and non-life business. Some countries do not allow for insurance undertakings to be active in both life and non-life insurance business and therefore composite insurance undertakings do not exist in these countries. In other countries (e.g., Austria, Belgium, Hungary, Italy, Mexico, Portugal, Spain) however, the share of employment in composite insurance undertakings accounts for more than half of the whole domestic insurance sector. Therefore, to have comparable data across years for life business data (resp. non-life), one has to sum up the life (resp. non-life) business of pure life (resp. non-life) undertakings and the life (resp. non-life) business of composite undertakings as of 2009. Item coverage Covers business written abroad by branches, agencies and subsidiaries established abroad of domestic undertakings and includes all business written outside the country by these entities (in both OECD and non-OECD countries).

This data deals with premiums written by classes of non-life insurance for the business written in the reporting country.

Geographic coverage OECD countries, Selected African and Asian countries, Selected Latin American countries Institutional coverage The insurance industry is a key component of the economy by virtue of the amount of premiums it collects, the scale of its investment and, more fundamentally, the essential social and economic role it plays in covering personal and business risks. The "OECD Insurance Statistics" publication provides major official insurance statistics for all OECD countries. The reader will find information on the diverse activities of this industry and on international insurance market trends. The data, which are standardised as far as possible, are broken down under numerous sub-headings, and a series of indicators makes the characteristics of the national markets more readily comprehensible. This publication is an essential tool for civil servants, businessmen and academics working in the insurance field. Item coverage This part consists of tables by indicators, which reflect the most significant characteristics of the OECD insurance market. In most cases, the tables contain data of all OECD countries as well as aggregated "OECD", "EU15" (the 15 member countries of the European Union in 1995) and "NAFTA" data from 1983 to 2015, for the following categories: - life insurance, - non-life insurance - and total. The premiums amounts are converted from national currencies into US dollar. Exchange rates used are end-of-period exchanges rates for all variables valued at the end of the year, and period-average for variables representig a flow during the year.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. Among the few available indicators of technology output, patent indicators are probably the most frequently used. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are : patents have a close link to invention; patents cover a broad range of technologies on which there are sometimes few other sources of data; the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); and patent data are readily available from patent offices. However, patents are subject to certain drawbacks: the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value; many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.; the propensity to patent differs across countries and industries; differences in patent regulations make it difficult to compare counts across countries; and changes in patent law over the years make it difficult to analyse trends over time.

Unit of measure used: Thousands   OECD countries seldom have tools specifically designed to measure the inflows and outflows of the foreign population, and national estimates are generally based either on population registers or residence permit data. This note is aimed at describing more systematically what is measured by each of the sources used.   Flows derived from population registers   Population registers can usually produce inflow and outflow data for both nationals and foreigners. To register, foreigners may have to indicate possession of an appropriate residence and/or work permit valid for at least as long as the minimum registration period. Emigrants are usually identified by a stated intention to leave the country, although the period of (intended) absence is not always specified.   When population registers are used, departures tend to be less well recorded than arrivals. Indeed, the emigrant who plans to return to the host country in the future may be reluctant to inform about his departure to avoid losing rights related to the presence on the register. Registration criteria vary considerably across countries (as the minimum duration of stay for individuals to be defined as immigrants ranges from three months to one year), which poses major problems of international comparison. For example, in some countries, register data cover a portion of temporary migrants, in some cases including asylum seekers when they live in private households (as opposed to reception centres or hostels for immigrants) and international students.   Flows derived from residence and/or work permits   Statistics on permits are generally based on the number of permits issued during a given period and depend on the types of permits used. The so-called “settlement countries” (Australia, Canada, New Zealand and the United States) consider as immigrants persons who have been granted the right of permanent residence. Statistics on temporary immigrants are also published in this database for these countries since the legal duration of their residence is often similar to long-term migration (over a year). In the case of France, the permits covered are those valid for at least one year (excluding students). Data for Italy and Portugal include temporary migrants.   Another characteristic of permit data is that flows of nationals are not recorded. Some flows of foreigners may also not be recorded, either because the type of permit they hold is not tabulated in the statistics or because they are not required to have a permit (freedom of movement agreements). In addition, permit data do not necessarily reflect physical flows or actual lengths of stay since: i) permits may be issued overseas but individuals may decide not to use them, or delay their arrival; ii) permits may be issued to persons who have in fact been resident in the country for some time, the permit indicating a change of status, or a renewal of the same permit.   Permit data may be influenced by the processing capacity of government agencies. In some instances a large backlog of applications may build up and therefore the true demand for permits may only emerge once backlogs are cleared.   Flows estimated from specific surveys   Ireland provides estimates based on the results of Quarterly National Household Surveys and other sources such as permit data and asylum applications. These estimates are revised periodically on the basis of census data. Data for the United Kingdom are based on a survey of passengers entering or exiting the country by plane, train or boat (International Passenger Survey). One of the aims of this survey is to estimate the number and characteristics of migrants. The survey is based on a random sample of approximately one out of every 500 passengers. The figures were revised significantly following the latest census in each of these two countries, which seems to indicate that these estimates do not constitute an “ideal” source either. Australia and New Zealand also conduct passenger surveys which enable them to establish the length of stay on the basis of migrants’ stated intentions when they enter or exit the country.

This indicator reports the percentage of students of each country of origin over the total of international students.

The Key Economic Indicators (KEI) database contains monthly and quarterly statistics (and associated statistical methodological information) for all OECD member countries and for a selection of non-member countries on a wide variety of economic indicators, namely: quarterly national accounts, industrial production, composite leading indicators, business tendency and consumer opinion surveys, retail trade, consumer and producer prices, hourly earnings, employment/unemployment, interest rates, monetary aggregates, exchange rates, international trade and balance of payments.

This dataset contains data on employment by hour bands for usual weekly hours worked in the main job.  Standard hour bands are reported for most countries.  Actual hours of work instead of usual hours of work are only available in some countries (Japan and Korea).  Data are broken down by professional status - employees, total employment - by sex and standardised age groups (15-24, 25-54, 55+, total). Unit of measure used - Data are expressed in thousands of persons. For detailed information on labour force surveys for all countries please see the attached file : www.oecd.org/els/employmentpoliciesanddata/LFSNOTE

Land resources are one of the four components of the natural environment: water, air, land and living resources. In this context land is both: a physical "milieu" necessary for the development of natural vegetation as well as cultivated vegetation;a resource for human activities.  The data presented here give information concerning land use state and changes (e.g. agricultural land, forest land).  Land area excludes area under inland water bodies (i.e. major rivers and lakes).   Arable refers to all land generally under rotation, whether for temporary crops (double-cropped areas are counted only once) or meadows, or left fallow (less than five years). These data are not meant to indicate the amount of land that is potentially cultivable.  Permanent crops are those that occupy land for a long period and do not have to be planted for several years after each harvest (e.g. cocoa, coffee, rubber). Land under vines and trees and shrubs producing fruits, nuts and flowers, such as roses and jasmine, is so classified, as are nurseries (except those for forest trees, which should be classified under "forests and other wooded land").  Arable and permanent crop land is defined as the sum of arable area and land under permanent crops.  Permanent meadows and pastures refer to land used for five years or more to grow herbaceous forage crops, either cultivated or growing wild (wild prairie or grazing land).  Forest refers to land spanning more than 0.5 hectare (0.005 km2) and a canopy cover of more than 10 percent, or trees able to reach these thresholds in situ. This includes land from which forests have been cleared but that will be reforested in the foreseeable future. This excludes woodland or forest predominantly under agricultural or urban land use and used only for recreation purposes.

The productivity and income estimates presented in this dataset are mainly based on GDP, population and employment data from the OECD Annual National Accounts. Hours worked are sourced from the OECD Annual National Accounts, the OECD Employment Outlook and national sources. The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the sources databases. However, timely data issues may arise and affect individual series and/or individual countries. In particular, annual hours worked estimates from the OECD Employment Outlook are typically updated less frequently (once a year, in the summer) than series of hours worked from the OECD Annual National Accounts.

This table contains labour force data on labour market status - population, labour force, unemployment and employment - by sex and by detailed age groups and standard age groups (15-24, 25-54, 55-64, 65+, total). Note: Population figures reported in table LFS by sex are Census-based, while the data for this table are taken from labour force surveys. Population for total age group refers to working age population (15 to 64 years).

This dataset contains the age composition (as a percentage of all ages) of the population for each labour force status - labour force, employment, unemployment - by sex.

The OECD Long-Term Baseline Scenario is a projection of some major economic variables beyond the short-term horizon of the OECD Economic Outlook. It covers all OECD economies, non-OECD G20 economies and key partners. The projection horizon is currently 2060. For the historical period and the short-run projection horizon, the series are consistent with those of the OECD Economic Outlook number in the dataset title. The definitions, sources and methods are also the same, except where noted explicitly (such as coverage of the non-OECD and world aggregates). For more details on the methodology, please see Boxes 1 to 3 in The Long View: Scenarios for the World Economy to 2060 and the references therein.The baseline scenario is a projection conditional on a number of assumptions, notably that countries do not carry out institutional and policy reforms. It is used as a reference point to illustrate the potential impact of structural reforms in alternative scenarios, such as those discussed in The Long View: Scenarios for the World Economy to 2060. The data for these alternative scenarios are not available here but can be obtained on request by writing to [email protected].

This biannual publication provides a set of indicators that reflect the level and structure of the efforts undertaken by OECD member countries and seven non-member economies (Argentina, People's Republic of China, Romania, Russian Federation, Singapore, South Africa, Chinese Taipei) in the field of science and technology. These data include final or provisional results as well as forecasts established by government authorities. The indicators cover the resources devoted to research and development, patent families, technology balance of payments and international trade in R&D-intensive industries. Also presented are the underlying economic series used to calculate these indicators. Indicators on R&D expenditures, budgets and personnel are derived from the OECD's Research and Development Statistics (RDS) database, which is based on the data reported to OECD and Eurostat in the framework of a co-ordinated collection. The sources for the other indicators include the OECD databases on Activities of Multinational Enterprises (AMNE), on Bilateral Trade in Goods by Industry and End-use Category database (BTDIxE), on Patents and on Technological Balance of Payments (TBP). The R&D data used in this publication have been collected and presented in line with the standard OECD methodology for R&D statistics as laid out in the OECD "Frascati Manual". The 2002 edition of the manual has now been superseded by the 2015 edition. The revised guidelines and definitions are in the course of being implemented and are not expected to change the main indicators significantly although some terminology changes will occur. This edition of MSTI has been compiled in accordance with the 2002 Frascati Manual; these changes will be made in a coming edition as R&D surveys move to the new standard.   2018 values are estimated value.

This dataset presents members' total use of the multilateral system i.e. both their multilateral aid ("Core contributions to") and bilateral aid channelled through ("Contributions through") multilateral organisations. These data originate from members' reporting at item-level in the CRS and are published here starting with 2011 data (item-level data for multilateral aid is not complete in CRS for earlier years).

Database published : June 2020 

Database published : June 2020 

The International Trade (MEI) dataset contains predominantly monthly merchandise trade statistics, and associated statistical methodological information, for all OECD member countries and for all non-OECD G20 economies and the EU.   The dataset itself contains international trade statistics measured in billions of United States dollars (USD) for: Exports, Imports, Balance. In all cases a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis.

The Financial Statistics dataset contains predominantly monthly statistics, and associated statistical methodological information, for the 36 OECD member countries and some selected other countries. The dataset itself contains financial statistics on 4 separate subjects: Monetary Aggregates, Interest Rates, Exchange Rates, and Share Prices. The data series presented within these subjects have been chosen as the most relevant financial statistics for which comparable data across countries is available. In all cases a lot of effort has been made to ensure that the data are internationally comparable across all countries presented and that all the subjects have good historical time-series’ data to aid with analysis. All data are available monthly, and are presented as either an index (where the year 2015 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context.

Air pollution is considered one of the most pressing environmental and health issues across OECD countries and beyond. According to the World Health Organisation (WHO), exposure to fine particulate matter (PM2.5) and ground-level ozone (O3) have potentially the most significant adverse effects on health compared to other pollutants. PM2.5 can be inhaled and cause serious health problems including both respiratory and cardiovascular disease, having its most severe effects on children and elderly people. Exposure to PM2.5 has been shown to considerably increase the risk of heart disease and stroke in particular. For these reasons, population exposure to (outdoor or ambient) PM2.5 has been identified as an OECD Green Growth headline indicator. Exposure to ground-level ozone (O3) has serious consequences for human health, contributing to, or triggering, respiratory diseases. These include breathing problems, asthma and reduced lung function (WHO, 2016; Brauer et al., 2016). Ozone exposure is highest in emission-dense countries with warm and sunny summers. The most important determinants are background atmospheric chemistry, climate, anthropogenic and biogenic emissions of ozone precursors such as volatile organic compounds, and the ratios between different emitted chemicals.

This dataset presents trends in amounts of municipal waste generated (including household waste), and the treatment and disposal method used. The amount of waste generated in each country is related to the rate of urbanisation, the types and pattern of consumption, household revenue and lifestyles.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries according to the classification ISIC rev.4. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2005). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents fixed assets by activity according to the classification ISIC rev.3 and by type of product and by type of assets.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. In national currency, in current prices and constant prices (national base year and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the balance sheets for non financial assets by institutional sectors, for both produced assets (fixed assets, inventories, valuables) and non-produced assets (tangible and intangible).  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

This dataset presents information using an "indicator" approach, focusing on cross-country comparisons. The aim is to make the accounts more accessible and informative, whilst taking the opportunity to present the conceptual underpinning  and comparability issues of each of the indicators presented. The range of indicators is set deliberately wide to reflect the richness of the national accounts dataset and to encourage users of economic statistics to refocus some of the spotlight that is often placed on GDP to other important economic indicators, which may better respond to their needs. Indeed many users themselves have been instrumental in this regard. The report of the Commission on the Measurement of Economic Performance and Social Progress (Stiglitz-Sen-Fitoussi Commission) is but one notable example. That is not to undermine the importance of GDP, which arguably remains the most important measure of total economic activity, but other measures may better reflect other aspects of the economy. For example, net national income may be a more appropriate measure of income available to citizens in countries with large outflows of property income, and household adjusted disposable income per capita may be a better indicator of the material well-being of citizens. But certainly from a data perspective more can and remains to be done. The Stiglitz-Sen-Fitoussi Commission for example highlights the pressing need for the provision, by official statistics institutes, of more detailed information that better describes the distributional aspects of activity, especially income, and the need to build on the national accounts framework to address issues such as non-market services produced by households or leisure. It is hoped that by producing a publication such as this and thereby raising awareness, the momentum from this and other initiatives will be accelerated. The publication itself will pick up new indicators in the future as they become available at the OECD.

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated..

It presents the whole set of non financial accounts, from the production account to the acquisitions of non-financial assets accounts. For general government sector, property income, other current transfers and capital transfers are consolidated.. It has been prepared from statistics reported to the OECD by Member countries in their answers to the new version of the annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

It presents gross capital formation, gross fixed capital formation, changes in inventories and acquisition less disposals of valuables broken down by detailed industries. Gross fixed capital formation is also available broken down by type of assets. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It presents the different transactions and balances to get from the GDP to the net lending/net borrowing. Therefore, it includes, in particular, national disposable income (gross and net), consumption of fixed capital as well as net saving.

It presents the final consumption expenditure of households broken down by the COICOP (Classification of Individual Consumption According to Purpose) classification and by durability.  It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

National Accounts - Volume IIIa - Financial Accounts - Flows, which record, by type of financial instruments, the financial transactions between institutional sectors, and are presented in two tables: Financial accounts, consolidated and Financial accounts, non-consolidated.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector in the SNA 1993 conceptual framework. In addition, it brings to light two relevant aggregates that do not belong to this conceptual frame work: the Total Revenue and the Total Expenditure of the general government sector. Unit of measure used - National currency; current prices. Expressed in millions.

It provides a breakdown of government expenditure according to their function. To meet this end, economic flows of expenditure must be aggregated according to the Classification of the Functions of Government (COFOG).

It presents the three approaches of the GDP: expenditure based, output based and income based. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA.

It presents population data and employment by main activity. It includes national concept data for economically active population, unemployed persons, total employment, employees and self-employed, as well as domestic concept data for total employment, employees and self-employed. The domestic concept data are available broken down by main activity. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire.

It presents simplified non-financial accounts, from the gross value added to the net lending/net borrowing. In this table, the total economy is broken down in three main institutional sectors: corporations, general government, households and non-profit institutions serving households. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. This questionnaire is designed to collect internationally comparable data according to the 1993 SNA. Unit of measure used - In national currency, in current prices. Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

It provides a faithful image, to the greatest extent possible, of the aggregates and balances of the general government sector Data are also available, for most countries, for the sub-sectors of general government.

Statistical population: Its presents output, intermediate consumption and the gross value added and its components, in particular compensation of employees and gross operating surplus and mixed income, broken down by detailed industries. It has been prepared from statistics reported to the OECD by Member countries in their answers to annual national accounts questionnaire. Data presented in this table will not be updated after summer 2010. Data reported to the OECD by countries in their answers to the annual national accounts questionnaire are now available on theme Industry and Services, Structural Analysis (STAN) Databases. Unit of measure used: In national currency, in current prices and constant prices (national base year, previous year prices and OECD base year i.e. 2010). Expressed in millions. For the Euro area countries, the data in national currency for all years are calculated using the fixed conversion rates against the euro.

The "National CPI Weights" dataset contains the annual expenditure weights for the national CPI for the OECD Member countries at a detailed level of the COICOP classification (except Australia and Korea). The weight of a product in a CPI is the proportion of total household expenditure which is spent on that product during the weight reference period.

The dataset on Quarterly Sector Accounts data presents the whole set of non financial accounts for the institutional sectors.It includes the following accounts: - Production account / External account of goods and services - Generation of income account - Allocation of primary income account - Secondary distribution of income account - Use of disposable income account - Change in net worth due to saving and capital transfers accounts - Acquisitions of non-financial assets account - Balance sheets for non-financial assets - Employment by sector These accounts are designed to produce accounting balances that are of particular interest for economic analysis such as value added, operating surplus, saving or net lending/net borrowing. Quarterly Sector Accounts data have been reported to the OECD by Member countries and Key Partner countries using a standard questionnaire (simplified table T0119 or detailed table T0801). These questionnaires are designed to collect internationally comparable data according to definitions and concepts presented in the System of National Accounts (SNA 2008 or SNA 1993 for a few countries):

Non-medical determinants of health: Unhealthy lifestyles and poor environments cause millions of people to die prematurely. Smoking, harmful alcohol use, physical inactivity and obesity are the root cause of many chronic conditions. This dataset presents the latest data for tobacco consumption (including daily smokers by age and sex), vaping (by age and sex), alcohol consumption, fruits and vegetables consumption, as well as measured and self-reported data on overweight and obesity.

The OECD Digital Economy Outlook 2020 examines trends and analyses emerging opportunities and challenges in the digital economy. It highlights how OECD countries and partner economies are taking advantage of information and communication technologies (ICTs) and the Internet to meet their public policy objectives. Through comparative evidence, it informs policy makers of regulatory practices and policy options to help maximise the potential of the digital economy as a driver for innovation and inclusive growth.   This third edition of the OECD Digital Economy Outlook provides a holistic overview of converging trends, policy developments and data on both the supply and demand sides of the digital economy. It illustrates how the digital transformation is affecting economies and societies. Finally, it provides a special focus on how the COVID-19 pandemic is amplifying opportunities and challenges from the digital transformation.

The OECD Science, Technology and Industry Outlook reviews key trends in STI policies and performance in OECD countries and major emerging economies. It is published every two years and draws on a unique international policy survey conducted by the OECD - with more than 45 countries involved in 2014 - and the latest OECD work on STI policy analysis and measurement. Following an overview of the recent STI global landscape, key current policy issues are discussed across a series of thematic policy profiles. Country profiles report the STI performance of individual countries and the most recent national policy developments.

The Agricultural Outlook has been prepared as a joint report by the Organisation for Economic Co-operation and Development (OECD) and the Food and Agriculture Organization (FAO) of the United Nations. The report provides a ten year forward looking, assessment of trends and prospects in the major temperate-zone agricultural commodity markets of biofuels, cereals, oilseeds and oilseed products, sugar, meat, fish and sea food, dairy products, cotton, roots and tubers and pulses. It is published annually, in the middle of the second quarter, as part of a continuing effort to promote informed discussion of emerging market and policy issues. The data used to develop the projections underlying the assessment are those available as of January 2023. The projections and assessments provided in the report are the result of close co-operation between the OECD and FAO Secretariats and national experts with a jointly developed modelling system, based on the AGLINK-COSIMO model, used to facilitate consistency in the projections. The data series for the projections are drawn from OECD and FAO databases. For the most part information in these databases has been taken from national statistical sources. For further details on particular series, enquiries should be directed to the OECD and FAO Secretariats.

Other official flows are official sector transactions which do not meet the ODA criteria, e.g.:  i.) Grants to developing countries for representational or essentially commercial purposes;  ii.) Official bilateral transactions intended to promote development but having a grant element of less than 25 per cent;  iii.) Official bilateral transactions, whatever their grant element, that are primarily export-facilitating in purpose. This category includes by definition export credits extended directly to an aid recipient by an official agency or institution ("official direct export credits");  iv.) The net acquisition by governments and central monetary institutions of securities issued by multilateral development banks at market terms;  v.) Subsidies (grants) to the private sector to soften its credits to developing countries [see Annex 3, paragraph A3.5.iv)b)];  vi.) Funds in support of private investment.

This table contains figures on the activity of affiliates located abroad by host country in the total manufacturing, total services and total business enterprise sectors. The units used to present data in AMNE are millions of national currency for monetary variables and units for the other variables. Monetary variables are in current prices. Euro-area countries: national currency data is expressed in euro beginning with the year of entry into the Economic and Monetary Union (EMU). For years prior to the year of entry into EMU, data have been converted from the former national currency using the appropriate irrevocable conversion rate. This presentation facilitates comparisons within a country over time and ensures that the historical evolution is preserved. Please note, however, that pre-EMU euro are a notional unit and should not be used to form area aggregates or to carry out cross-country comparisons.

Patents are a key measure of innovation output, as patent indicators reflect the inventive performance of countries, regions, technologies, firms, etc. They are also used to track the level of diffusion of knowledge across technology areas, countries, sectors, firms, etc., and the level of internationalisation of innovative activities. Patent indicators can serve to measure the output of R&D, its productivity, structure and the development of a specific technology/industry. The relationship between patents as an intermediate output resulting from R&D inputs has been investigated extensively. Patents are often interpreted as an output indicator; however, they could also be viewed as an input indicator, as patents are used as a source of information by subsequent inventors. Like any other indicator, patent indicators have many advantages and disadvantages. The advantages of patent indicators are :patents have a close link to invention;patents cover a broad range of technologies on which there are sometimes few other sources of data;the contents of patent documents are a rich source of information (on the applicant, inventor, technology category, claims, etc.); andpatent data are readily available from patent offices. However, patents are subject to certain drawbacks:the value distribution of patents is skewed as many patents have no industrial application (and hence are of little value to society) whereas a few are of substantial value;many inventions are not patented because they are not patentable or inventors may protect the inventions using other methods, such as secrecy, lead time, etc.;the propensity to patent differs across countries and industries;differences in patent regulations make it difficult to compare counts across countries; andchanges in patent law over the years make it difficult to analyse trends over time. 

The Population and Vital Statistics dataset presents components of change in the population during one year and mid-year population data for the 34 OECD member countries. Data are presented in thousands of persons and as rates in per 1000. The components of change in the population during one year are presented as follow: the first statistics refer to the population on January 1st for each year, the natural increase of the population is the difference between the number of births and deaths over the calendar year, the addition of net migration and statistical adjustments to the natural increase gives the total increase of the population over the calendar year. The addition of the total population increase to the population on January 1st gives the population on December 31st. Note: No longer this dataset be collected by OECD. Population and demographic events are available from the United Nation database at "https://esa.un.org/unpd/wpp/Download/Standard/Population/."    

This dataset contains the number of people by sex and age group per country.

Private transactions are those undertaken by firms and individuals resident in the reporting country.

The 'Production and Sales (MEI)' dataset is a dataset containing predominantly monthly statistics, and associated statistical methodological information, for the 34 OECD member countries and for selected other economies. The Production and Sales dataset contains industrial statistics on four separate subjects: Production; Sales; Orders; and Work started. The data series presented within these subjects have been chosen as the most relevant industrial statistics for which comparable data across countries is available. For Production, data comprise Indices of industrial production (IIP) for total industry, manufacturing, energy and crude petroleum; and further disaggregation of manufacturing production for intermediate goods and for investment goods and crude steel. For others, they comprise retail trade and registration of passenger cars; and permits issued and work started for dwellings. Considerable effort has been made to ensure that the data are internationally comparable across all countries presented, coverage for as many countries as possible, and that all the subjects have reasonable length of time-series to assist analysis. Most data are available monthly and are presented as an index (where the year 2010 is the base year) or as a level depending on which measure is seen as the most appropriate and/or useful in the economic analysis context. Due to differences in statistical or economic environment at country level, however, availability of data varies from one country to another.

The OECD Productivity Database aims at providing users with the most comprehensive and the latest productivity estimates. The update cycle is on a rolling basis, i.e. each variable in the dataset is made publicly available as soon as it is updated in the OECD Annual National Accounts database. However, timely data issues may arise and affect individual series and/or individual countries. Sectors differ from each other with respect to their productivity growth. Understanding the drivers of productivity growth at the total economy level requires an understanding of the contribution of each sector. Data of real gross value added, labour compensation, hours worked and employment are sourced from the OECD Annual National Accounts.

Distribution of graduates/new entrants by gender, country of origin and age as well as the proportion of each tertiary educational level over the total of first-time graduates and new entrants at tertiary level.

This dataset contains Purchasing Power Parities (PPPs) for all OECD countries. PPPs are the rates of currency conversion that eliminate the differences in price levels between countries. Per capita volume indices based on PPP converted data reflect only differences in the volume of goods and services produced. Comparative price levels are defined as the ratios of PPPs to exchange rates. They provide measures of the differences in price levels between countries. The PPPs are given in national currency units per US dollar. The price levels and volume indices derived using these PPPs have been rebased on the OECD average. Per capita volume indices should not be used to rank countries as PPPs are statistical constructs rather than precise measures. Minor differences between countries should be interpreted with caution.

The OECD's quarterly national accounts (QNA) dataset presents data collected from all the OECD member countries and some other major economies on the basis of a standardised questionnaire. It contains a wide selection of generally seasonally adjusted quarterly series most widely used for economic analysis from 1960 or whenever available:

This table contains research and development (R&D) expenditure statistics on current domestic R&D and gross domestic R&D expenditures by sector of performance (business enterprise, government, higher education, private non-profit, and total intramural) and by type of R&D within each sector (basic research, applied research, experimental development, non-specified, and total activity). Unit of measure used - Data are provided in million national currency (for the euro zone, pre-EMU euro or EUR), million current PPP USD and million constant USD (2005 prices and PPPs).

These tables contain research and development (RD) personnel statistics. Number of RD personnel is provided in both headcounts and full-time equivalent on RD by sex, sector of employment (business enterprise, government, higher education, and private non-profit) and by occupation (researchers, technicians and other support staff).

The Regional database contains annual data from 1995 to the most recent available year (generally 2022 for demographic and labor market data, 2021 for regional accounts, innovation and social statistics). 

The Regional database contains annual data from 1995 to the most recent available year (generally 2018 for demographic and labor market data, 2017 for regional accounts, innovation and social statistics). The data collection is undertaken by the Center for Entrepreneurship, SMEs, Regions and Cities (CFE). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and via downloads from the web-sites of National Statistical Offices and Eurostat

The Regional Database contains annual data from 1995 to the most recent available year. The data collection is undertaken by the Directorate of Public Governance and Territorial Development, within the Regional Development Policy division (GOV/RDP). Statistics are collected through an annual questionnaire sent to the delegates of the Working Party on Territorial Indicators (WPTI), and through access to the web-sites of National Statistical Offices and Eurostat. The WPTI is responsible for developing regional (subnational) and urban statistics and providing analysis to support policy evaluations. The Regional Database includes statistics on the regional distribution of resources, regional disparities, and how regions contribute to national growth and the well-being of society. Under this framework, the Regional Database is one of the pillars for providing indicators to the publication OECD Regions at a Glance (link).

The Regional Database contains annual data from 1995 to the most recent available year (generally 2016 for demographic, 2015 for labor market data and 2014 for regional accounts, innovation and social statistics).

The Regional Database contains annual data from 1995 to the most recent available year (generally 2014 for demographic and labour market data, 2013 for regional accounts, innovation and social statistics).   In any analytical study conducted at sub-national levels, the choice of the territorial unit is of prime importance. The territorial grids (TL2 and TL3) used in this database are officially established and relatively stable in all member countries, and are used by many as a framework for implementing regional policies. This classification - which, for European countries, is largely consistent with the Eurostat classification - facilitates greater comparability of regions at the same territorial level. The differences with the Eurostat NUTS classification concern Belgium, Greece and the Netherlands where the NUTS 2 level correspond to the OECD TL3 and Germany where the NUTS1 corresponds to the OECD TL2 and the OECD TL3 corresponds to 97 spatial planning regions (Groups of Kreise). For the United Kingdom the Eurostat NUTS1 corresponds to the OECD TL2. Due to limited data availability, labour market indicators in Canada are presented for a different grid (groups of TL3 regions). Since these breakdowns are not part of the OECD official territorial grids, for the sake of simplicity they are labelled as Non Official Grids (NOG).

Residential Property Prices Indices (RPPIs) – also named House price indices (HPIs), are index numbers that measure the price of residential properties over time. RPPIs are key statistics not only for citizens and households across the world, but also for economic and monetary policy makers. Among their professional uses, they serve, for example, to monitor macroeconomic imbalances and risk exposure of the financial sector. This dataset covers the 34 OECD member countries and some non-member countries. Please note that not all RPPIs are available for all countries. For instance, the RPPI at the most aggregate level for the United States only covers single-family dwellings, not all types of dwellings as it is the case for most other OECD countries. This dataset presents, for each country, the RPPI that is available at the most aggregate level. It mainly contains quarterly statistics. The dataset called “Residential Property Price Indices (RPPIs) – Complete dataset” contains the full list of available RPPIs. The dataset called “Analytical house price indicators” contains, in addition to nominal RPPIs, information on real house prices, rental prices and the ratios of nominal prices to rents and to disposable household income per capita. The datasets “Analytical house price indicators” and “Residential Property Price Indices (RPPIs) – Headline Indicators” do not refer to the same price indices for Brazil, Canada, China, Germany, the United States and the Euro area. These differences are further documented in country-specific metadata. For the United States, the series used in “Analytical house price indicators” is included in the dataset called “Residential Property Price Indices (RPPIs) – Complete database”, but is not the headline indicator. For all other countries, non-seasonally adjusted price indices in both datasets are identical in the period in which they overlap.For all other countries, non-seasonally adjusted price indices in both datasets are identical on the overlapping period.

Data on government sector receipts, and on taxes in particular, are basic inputs to most structural economic descriptions and economic analyses and are increasingly used in international comparisons. This annual database presents a unique set of detailed and internationally comparable data on both tax and non-tax revenue in a common format for African countries participating in Revenue Statistics in Africa. Click to collapse Direct source Country representatives authorized to obtain revenue data from the appropriate government departments and responsible for compiling the data and preparing data tables that adhere to the OECD tax classification.

A key set of information for policy analysis is i) how much revenue is collected; ii) in what ways is it collected; iii) from which institutional units of the economy are revenues raised for each particular financing scheme; and iv) which financing schemes receive those revenues. This dataset provides information about the contribution mechanisms the particular financing schemes use to raise their revenues. Understanding the nature of the flows is of importance from the perspective of both health and public finance policy. For example, the classification of revenues make it possible to distinguish between public and private funding of health care finance. Understanding how resources are raised by financing schemes is important for many countries, as many health systems are struggling with the issue of funding. The classification of revenues of financing schemes is suitable for tracking the collection mechanisms of a financing framework. Furthermore, the new classification makes it possible to analyse the contribution of the institutional units to health financing.

Trade in services drives the exchange of ideas, know-how and technology. It helps firms cut costs, increase productivity, participate in global value chains and boost competitiveness. Consumers benefit from lower prices and greater choice. However, international trade in services is often impeded by trade and investment barriers and domestic regulations. The Service Trade Restrictions Index (STRI) helps identify which policy measures restrict trade. It provides policy makers and negotiators with information and measurement tools to open up international trade in services and negotiate international trade agreements. It can also help governments identify best practice and then focus their domestic reform efforts on priority sectors and measures. The STRI indices take the value from 0 to 1, where 0 is completely open and 1 is completely closed. They are calculated on the basis of information in the STRI database which reports regulation currently in force.

This indicator shows the percentage of international students in each field of education.

The Short-Term Labour Market Statistics dataset contains predominantly quarterly labour statistics, and associated statistical methodological information, for the 35 OECD member countries and selected other economies. The Short-Term Labour Market Statistics dataset covers countries that compile labour statistics from sample household surveys on a monthly or quarterly basis. It is widely accepted that household surveys are the best source for labour market key statistics. In such surveys, information is collected from people living in households through a representative sample and the surveys are based on standard methodology and procedures used internationally. The subjects available cover: working age population by age; active and inactive labour force by age; employment by economic activity, by working time and by status; and, unemployment (including monthly harmonised unemployment) by age and by duration. Data is expressed in levels (thousands of persons) or rates (e.g. employment rate) where applicable.   Data are based on Labour Force Surveys and national information in this dataset is directly collected from the following sources:   ABS - Australian Bureau of Statistics (Australia) Statistics Canada (Canada) INE - Instituto Nacional de Estadísticas (Chile) CBS – Central Bureau of Statistics (Israel) Statistics Bureau (Japan) Statistics Korea (Korea) INEGI - Instituto Nacional de Estadísticas y Geografía (Mexico) Statistics New Zealand (New Zealand) BLS - Bureau of Labor Statistics (the United States) Eurostat (Austria, Belgium, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Luxembourg, the Netherlands, Norway, Poland, Portugal, the Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom).

The aim of the OECD's new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

The aim of the OECD’s new Skills for Jobs Indicators is to facilitate better adaptation to changing skill needs by making available a database of skill imbalances indicators that is comparable across countries and regularly updated. The Skill Needs Indicators provide an overview of the shortages and surpluses of skills across countries.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

Input-Output tables describe the sale and purchase relationships between producers and consumers within an economy. They can be produced by illustrating flows between the sales and purchases (final and intermediate) of industry outputs or by illustrating the sales and purchases (final and intermediate) of product outputs. The OECD Input-Output database is presented on the former basis, reflecting in part the collection mechanisms for many other data sources such as research and development Research and Development expenditure data, employment statistics, pollution data, energy consumption, which are in the main collected by enterprise or by establishment, and thus according to industry classifications.

The OECD indicators of employment protection legislation evaluate the regulations on the dismissal of workers on regular contracts and the hiring of workers on temporary contracts. They cover both individual and collective dismissals.The indicators have been compiled using the Secretariat’s own reading of statutory laws, collective bargaining agreements and case law as well as contributions from officials from OECD member countries and advice from country experts

This dataset presents internationally comparable data on (full-time) salaries of teachers and school heads in public institutions at pre-primary, primary and general (lower and upper) secondary education. Actual salaries are displayed by level of education and are also available by age and gender. Data also include other statistics related to salaries of teachers.

This dataset presents internationally comparable data on (full-time) salaries of teachers and school heads in public institutions at pre-primary, primary and general (lower and upper) secondary education. Statutory salaries are displayed by level of education, Data also include other statistics related to salaries of teachers.

Since new and young firms contribute critically to job creation, innovation and growth, observing recent trends of firm formation provides valuable information to policy makers. Seasonal adjustment: For the purpose of presentation of quarterly series, seasonal adjustment is applied using TramoSeats algorithm with 5 regressors: log/level, trading days, Easter, outlier detection, and automatic model identification). Series are log-transformed and decomposed into a trend component. Finally, index is calculated based on a 2007 (2007 = average of 2007 quarters) in order to present movements between the base year and a given quarter.

Official Development Financing (ODF), measured for recipient countries only, is defined as the sum of their receipts of bilateral ODA, concessional and non-concessional resources from multilateral sources, and bilateral other official flows made available for reasons unrelated to trade, in particular loans to refinance debt.

Total Official Flows: the sum of Official Development Assistance (ODA) and Other Official Flows (OOF) represents the total (gross or net) disbursements by the official sector at large to the recipient country shown.

Total Receipts, Net: in addition to Official Development Assistance, this heading includes in particular: other official bilateral transactions which are not concessional or which, even though they have concessional elements, are primarily trade facilitating in character (i.e., "Other Official Flows''); changes in bilateral long-term assets of the private non-monetary and monetary sectors, in particular guaranteed export credits, private direct investment, portfolio investment and, to the extent they are not covered in the preceding headings, loans by private banks. Flows from the multilateral sector which are not classified as concessional are also included here.

This table presents export/import information by enterprise size class and partner country.

This dataset shows the number of exporters and importers and their associated trade values for a selected set of partner countries and zones, broken down by three economic sectors: industry, trade and repair and other sectors. Total values for the wide economy are also displayed.Recommended uses and limitations EU countries break down trade data into Intra- and extra- EU zones, whereas non EU countries report their Total trade. Trade values have been aggregated for EU countries and Total (Intra-EU plus Extra-EU) trade flows are displayed, whereas Intra and Extra-EU data expressed in term of number of enterprises cannot be summed up, because of possible double-counting (same enterprise can be trader in both intra- and extra- EU trade). Data have been collected in ISIC revision 3 from 2003 up to 2007 and in ISIC revision 4 as from reference year 2008. Time series are affected by this change in classification, and thus data are displayed into two separate databases.

The TiVA database contains a range of indicators measuring the value added content of international trade flows and final demand. The indicators are derived from the 2016 version of OECD's Inter-Country Input-Output (ICIO) Database.  The ICIO has been constructed from various national and international data sources all drawn together and balanced under constraints based on official (SNA93) National Accounts by economic activity and National Accounts main aggregates.  Underlying sources used are notably:  • National supply and use tables (SUTs)  • National and harmonised Input-Output Tables • Bilateral trade in goods by industry and end-use category (BTDIxE) and  • Bilateral trade in services.  Compared to the old versions of the TiVA database, this current version includes two more countries, Morocco and Peru. The data are presented for all years from 1995 to 2011. The industry breakdown remains the same. 

The Trade in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value added in final demand presented here, is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database and provides estimates of final demand in country c for industry i final goods and services, broken down by the value added originating from source industry j in source country s.   In other words, it reveals how the value of final demand goods and services consumed within a country is an accumulation of value generated by many industries in many countries.   For a description of the method used for calculating these estimates using the ICIO   Domestic value added origin is shown where source country s = c and, for convenience, also represented by source country = “DXD: Domestic”.   From this data cube, a range of final demand-based measures can be derived including those in TiVA principal indicators cube such as: • Domestic value added embodied in foreign final demand, FFD_DVA and related partner shares FFD_DVApSH. • Foreign value added embodied in domestic final demand, DFD_FVA and related partner shares DFD_FVApSH.

The Trade-in Value Added (TiVA) database consists of a set of measures that aim to provide better insights into global production networks and supply chains than is possible with conventional trade statistics.   The Origin of value-added in gross imports presented here is derived from the latest version of OECD’s Inter-Country Input-Output (ICIO) database. It provides estimates of gross imports by country c of goods and services from industry in partner country/region p broken down by value-added originating from source country/region s.   In other words, the four dimensions link the imports of country c to the value-added from source country s embodied in the exports of industry in the exporting country p - thus revealing how the value of a country’s gross imports of intermediate and final products from a particular partner is an accumulation of value generated by many countries.   For a description of the method used for calculating these estimates, using the ICIO   From this data cube, a range of gross imports-based measures can be derived including the following found in the main TiVA indicators database: • Total gross imports by industry, IMGR (c, i): set exporting country p = World and source country s = World. • Domestic value-added content of gross imports by partner and industry, IMGR_DVA (c, i, p): set source country s = importing country c. • Share of IMGR_DVA in relation to IMGR: IMGR_DVAsh (c, i, p).   Note that the same value-added originating from source country s can be present in the gross imports of more than one importing country c (as embodied value-added, from upstream production, may cross national borders many times). In general, therefore, these estimates should be viewed from the perspective of an importing country c.

This dataset contains data on the share of the five durations - less than 1 month, >1 month and < 3 months, >3 months and <6 months, >6 months and <1 year, 1 year and over - of unemployment among total unemployment by sex and by standardised age groups (15-19, 15-24, 20-24, 25-54, 55+, total).